Enable the Fibre Channel or iSCSI drivers

Query storage pool id for configure dpl_pool of the cinder.conf.

1. Logon onto the storage system with administrator access.

   $ ssh root@STORAGE IP ADDRESS

2. View the current usable pool id.

   $ flvcli show pool list
   - d5bd40b58ea84e9da09dcf25a01fdc07 : default_pool_dc07

3. Use d5bd40b58ea84e9da09dcf25a01fdc07 to config the dpl_pool of /etc/cinder/cinder.conf.

	Note
	Other management command can reference by command help flvcli -h.

Make the following changes on the volume node /etc/cinder/cinder.conf file.

# IP address of SAN controller (string value)
san_ip=STORAGE IP ADDRESS

# Username for SAN controller (string value)
san_login=USERNAME

# Password for SAN controller (string value)
san_password=PASSWORD

# Use thin provisioning for SAN volumes? (boolean value)
san_thin_provision=true

# The port that the iSCSI daemon is listening on. (integer value)
iscsi_port=3260

# DPL pool uuid in which DPL volumes are stored. (string value)
dpl_pool=d5bd40b58ea84e9da09dcf25a01fdc07

# DPL port number. (integer value)
dpl_port=8357

# Uncomment one of the next two option to enable Fibre channel or iSCSI
# FIBRE CHANNEL(uncomment the next line to enable the FC driver)
#volume_driver=cinder.volume.drivers.prophetstor.dpl_fc.DPLFCDriver
# iSCSI (uncomment the next line to enable the iSCSI driver)
#volume_driver=cinder.volume.drivers.prophetstor.dpl_iscsi.DPLISCSIDriver

Save the changes to the /etc/cinder/cinder.conf file and restart the cinder-volume service.