watcher.conf¶

The watcher.conf file contains most of the options to configure the Watcher services.

DEFAULT¶

enable_authentication¶

Type: boolean
Default: True

This option enables or disables user authentication via keystone. Default value is True.

fatal_exception_format_errors¶

Type: boolean
Default: False

Make exception message format errors fatal.

pybasedir¶

Type: string
Default: /home/zuul/src/opendev.org/openstack/watcher/watcher

Directory where the watcher python module is installed.

bindir¶

Type: string
Default: $pybasedir/bin

Directory where watcher binaries are installed.

state_path¶

Type: string
Default: $pybasedir

Top-level directory for maintaining watcher’s state.

periodic_interval¶

Type: integer
Default: 60
Mutable: This option can be changed without restarting.

Seconds between running periodic tasks.

host¶

Type: host address
Default: ubuntu-focal-rax-dfw-0025358249

Name of this node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. However, the node name must be valid within an AMQP key.

service_down_time¶

Type: integer
Default: 90

Maximum time since last check-in for up service.

run_external_periodic_tasks¶

Type: boolean
Default: True

Some periodic tasks can be run in a separate process. Should we run them here?

backdoor_port¶

Type: string
Default: <None>

Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.

backdoor_socket¶

Type: string
Default: <None>

Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with ‘backdoor_port’ in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option. Inside the path {pid} will be replaced with the PID of the current process.

log_options¶

Type: boolean
Default: True

Enables or disables logging values of all registered options when starting a service (at DEBUG level).

graceful_shutdown_timeout¶

Type: integer
Default: 60

Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.

api_paste_config¶

Type: string
Default: api-paste.ini

File name for the paste.deploy config for api service

wsgi_log_format¶

Type: string
Default: %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f

A python format string that is used as the template to generate log lines. The following values can beformatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.

tcp_keepidle¶

Type: integer
Default: 600

Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not supported on OS X.

wsgi_default_pool_size¶

Type: integer
Default: 100

Size of the pool of greenthreads used by wsgi

max_header_line¶

Type: integer
Default: 16384

Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated when keystone is configured to use PKI tokens with big service catalogs).

wsgi_keep_alive¶

Type: boolean
Default: True

If False, closes the client socket connection explicitly.

client_socket_timeout¶

Type: integer
Default: 900

Timeout for client connections’ socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value of ‘0’ means wait forever.

rpc_conn_pool_size¶

Type: integer
Default: 30
Minimum Value: 1

Size of RPC connection pool.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_conn_pool_size

conn_pool_min_size¶

Type: integer
Default: 2

The pool size limit for connections expiration policy

conn_pool_ttl¶

Type: integer
Default: 1200

The time-to-live in sec of idle connections in the pool

executor_thread_pool_size¶

Type: integer
Default: 64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_thread_pool_size

rpc_response_timeout¶

Type: integer
Default: 60

Seconds to wait for a response from a call.

transport_url¶

Type: string
Default: rabbit://

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

control_exchange¶

Type: string
Default: openstack

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

rpc_ping_enabled¶

Type: boolean
Default: False

Add an endpoint to answer to ping calls. Endpoint is named oslo_rpc_server_ping

debug¶

Type: boolean
Default: False
Mutable: This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append¶

Type: string
Default: <None>
Mutable: This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations¶
Group	Name
DEFAULT	log-config
DEFAULT	log_config

log_date_format¶

Type: string
Default: %Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file¶

Type: string
Default: <None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations¶
Group	Name
DEFAULT	logfile

log_dir¶

Type: string
Default: <None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations¶
Group	Name
DEFAULT	logdir

watch_log_file¶

Type: boolean
Default: False

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog¶

Type: boolean
Default: False

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal¶

Type: boolean
Default: False

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility¶

Type: string
Default: LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json¶

Type: boolean
Default: False

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr¶

Type: boolean
Default: False

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog¶

Type: boolean
Default: False

Log output to Windows Event Log.

log_rotate_interval¶

Type: integer
Default: 1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is set to “interval”.

log_rotate_interval_type¶

Type: string
Default: days
Valid Values: Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count¶

Type: integer
Default: 30

Maximum number of rotated log files.

max_logfile_size_mb¶

Type: integer
Default: 200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type¶

Type: string
Default: none
Valid Values: interval, size, none

Log rotation type.

Possible values

interval: Rotate logs at predefined time intervals.
size: Rotate logs once they reach a predefined size.
none: Do not rotate log files.

logging_context_format_string¶

Type: string
Default: %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string¶

Type: string
Default: %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix¶

Type: string
Default: %(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix¶

Type: string
Default: %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format¶

Type: string
Default: %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels¶

Type: list
Default: ['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors¶

Type: boolean
Default: False

Enables or disables publication of error events.

instance_format¶

Type: string
Default: "[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format¶

Type: string
Default: "[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval¶

Type: integer
Default: 0

Interval, number of seconds, of log rate limiting.

rate_limit_burst¶

Type: integer
Default: 0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level¶

Type: string
Default: CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations¶

Type: boolean
Default: False

Enables or disables fatal status of deprecations.

api¶

port¶

Type: port number
Default: 9322
Minimum Value: 0
Maximum Value: 65535

The port for the watcher API server

host¶

Type: host address
Default: 127.0.0.1

The listen IP address for the watcher API server

max_limit¶

Type: integer
Default: 1000

The maximum number of items returned in a single response from a collection resource

workers¶

Type: integer
Default: <None>
Minimum Value: 1

Number of workers for Watcher API service. The default is equal to the number of CPUs available if that can be determined, else a default worker count of 1 is returned.

enable_ssl_api¶

Type: boolean
Default: False

Enable the integrated stand-alone API to service requests via HTTPS instead of HTTP. If there is a front-end service performing HTTPS offloading from the service, this option should be False; note, you will want to change public API endpoint to represent SSL termination URL with ‘public_endpoint’ option.

enable_webhooks_auth¶

Type: boolean
Default: True

This option enables or disables webhook request authentication via keystone. Default value is True.

cache¶

config_prefix¶

Type: string
Default: cache.oslo

Prefix for building the configuration dictionary for the cache region. This should not need to be changed unless there is another dogpile.cache region with the same configuration name.

expiration_time¶

Type: integer
Default: 600

Default TTL, in seconds, for any cached item in the dogpile.cache region. This applies to any cached method that doesn’t have an explicit cache expiration time defined for it.

backend¶

Type: string
Default: dogpile.cache.null
Valid Values: oslo_cache.memcache_pool, oslo_cache.dict, oslo_cache.mongo, oslo_cache.etcd3gw, dogpile.cache.pymemcache, dogpile.cache.memcached, dogpile.cache.pylibmc, dogpile.cache.bmemcached, dogpile.cache.dbm, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.memory_pickle, dogpile.cache.null

Cache backend module. For eventlet-based or environments with hundreds of threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is recommended. For environments with less than 100 threaded servers, Memcached (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test environments with a single instance of the server can use the dogpile.cache.memory backend.

backend_argument¶

Type: multi-valued
Default: ''

Arguments supplied to the backend module. Specify this option once per argument to be passed to the dogpile.cache backend. Example format: “<argname>:<value>”.

proxies¶

Type: list
Default: []

Proxy classes to import that will affect the way the dogpile.cache backend functions. See the dogpile.cache documentation on changing-backend-behavior.

enabled¶

Type: boolean
Default: False

Global toggle for caching.

debug_cache_backend¶

Type: boolean
Default: False

Extra debugging from the cache backend (cache keys, get/set/delete/etc calls). This is only really useful if you need to see the specific cache-backend get/set/delete calls with the keys/values. Typically this should be left set to false.

memcache_servers¶

Type: list
Default: ['localhost:11211']

Memcache servers in the format of “host:port”. (dogpile.cache.memcached and oslo_cache.memcache_pool backends only). If a given host refer to an IPv6 or a given domain refer to IPv6 then you should prefix the given address with the address family (inet6) (e.g inet6[::1]:11211, inet6:[fd12:3456:789a:1::1]:11211, inet6:[controller-0.internalapi]:11211). If the address family is not given then default address family used will be inet which correspond to IPv4

memcache_dead_retry¶

Type: integer
Default: 300

Number of seconds memcached server is considered dead before it is tried again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_socket_timeout¶

Type: floating point
Default: 1.0

Timeout in seconds for every call to a server. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_pool_maxsize¶

Type: integer
Default: 10

Max total number of open connections to every memcached server. (oslo_cache.memcache_pool backend only).

memcache_pool_unused_timeout¶

Type: integer
Default: 60

Number of seconds a connection to memcached is held unused in the pool before it is closed. (oslo_cache.memcache_pool backend only).

memcache_pool_connection_get_timeout¶

Type: integer
Default: 10

Number of seconds that an operation will wait to get a memcache client connection.

memcache_pool_flush_on_reconnect¶

Type: boolean
Default: False

Global toggle if memcache will be flushed on reconnect. (oslo_cache.memcache_pool backend only).

tls_enabled¶

Type: boolean
Default: False

Global toggle for TLS usage when comunicating with the caching servers.

tls_cafile¶

Type: string
Default: <None>

Path to a file of concatenated CA certificates in PEM format necessary to establish the caching servers’ authenticity. If tls_enabled is False, this option is ignored.

tls_certfile¶

Type: string
Default: <None>

Path to a single file in PEM format containing the client’s certificate as well as any number of CA certificates needed to establish the certificate’s authenticity. This file is only required when client side authentication is necessary. If tls_enabled is False, this option is ignored.

tls_keyfile¶

Type: string
Default: <None>

Path to a single file containing the client’s private key in. Otherwhise the private key will be taken from the file specified in tls_certfile. If tls_enabled is False, this option is ignored.

tls_allowed_ciphers¶

Type: string
Default: <None>

Set the available ciphers for sockets created with the TLS context. It should be a string in the OpenSSL cipher list format. If not specified, all OpenSSL enabled ciphers will be available.

ceilometer_client¶

api_version¶

Type: string
Default: 2

Version of Ceilometer API to use in ceilometerclient.

Warning

This option is deprecated for removal since 1.13.0. Its value may be silently ignored in the future.

Reason: Ceilometer API is deprecated since Ocata release. Any related configuration options are deprecated too.

endpoint_type¶

Type: string
Default: internalURL

Type of endpoint to use in ceilometerclient. Supported values: internalURL, publicURL, adminURL. The default is internalURL.

Warning

This option is deprecated for removal since 1.13.0. Its value may be silently ignored in the future.

Reason: Ceilometer API is deprecated since Ocata release. Any related configuration options are deprecated too.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

Warning

This option is deprecated for removal since 1.13.0. Its value may be silently ignored in the future.

Reason: Ceilometer API is deprecated since Ocata release. Any related configuration options are deprecated too.

cinder_client¶

api_version¶

Type: string
Default: 3

Version of Cinder API to use in cinderclient.

endpoint_type¶

Type: string
Default: publicURL

Type of endpoint to use in cinderclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

collector¶

collector_plugins¶

Type: list
Default: ['compute']

The cluster data model plugin names.

Supported in-tree collectors include:

compute - data model collector for nova
storage - data model collector for cinder
baremetal - data model collector for ironic

Custom data model collector plugins can be defined with the watcher_cluster_data_model_collectors extension point.

api_call_retries¶

Type: integer
Default: 10

Number of retries before giving up on external service calls.

api_query_timeout¶

Type: integer
Default: 1

Time before retry after failed call to external service.

database¶

mysql_engine¶

Type: string
Default: InnoDB

MySQL engine to use.

sqlite_synchronous¶

Type: boolean
Default: True

If True, SQLite uses synchronous mode.

Deprecated Variations¶
Group	Name
DEFAULT	sqlite_synchronous

backend¶

Type: string
Default: sqlalchemy

The back end to use for the database.

Deprecated Variations¶
Group	Name
DEFAULT	db_backend

connection¶

Type: string
Default: <None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations¶
Group	Name
DEFAULT	sql_connection
DATABASE	sql_connection
sql	connection

slave_connection¶

Type: string
Default: <None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode¶

Type: string
Default: TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_enable_ndb¶

Type: boolean
Default: False

If True, transparently enables support for handling MySQL Cluster (NDB).

connection_recycle_time¶

Type: integer
Default: 3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

max_pool_size¶

Type: integer
Default: 5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

max_retries¶

Type: integer
Default: 10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations¶
Group	Name
DEFAULT	sql_max_retries
DATABASE	sql_max_retries

retry_interval¶

Type: integer
Default: 10

Interval between retries of opening a SQL connection.

Deprecated Variations¶
Group	Name
DEFAULT	sql_retry_interval
DATABASE	reconnect_interval

max_overflow¶

Type: integer
Default: 50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations¶
Group	Name
DEFAULT	sql_max_overflow
DATABASE	sqlalchemy_max_overflow

connection_debug¶

Type: integer
Default: 0
Minimum Value: 0
Maximum Value: 100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations¶
Group	Name
DEFAULT	sql_connection_debug

connection_trace¶

Type: boolean
Default: False

Add Python stack traces to SQL as comment strings.

Deprecated Variations¶
Group	Name
DEFAULT	sql_connection_trace

pool_timeout¶

Type: integer
Default: <None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations¶
Group	Name
DATABASE	sqlalchemy_pool_timeout

use_db_reconnect¶

Type: boolean
Default: False

Enable the experimental use of database reconnect on connection lost.

db_retry_interval¶

Type: integer
Default: 1

Seconds between retries of a database transaction.

db_inc_retry_interval¶

Type: boolean
Default: True

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval¶

Type: integer
Default: 10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries¶

Type: integer
Default: 20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters¶

Type: string
Default: ''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

glance_client¶

api_version¶

Type: string
Default: 2

Version of Glance API to use in glanceclient.

endpoint_type¶

Type: string
Default: publicURL

Type of endpoint to use in glanceclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

gnocchi_client¶

api_version¶

Type: string
Default: 1

Version of Gnocchi API to use in gnocchiclient.

endpoint_type¶

Type: string
Default: public

Type of endpoint to use in gnocchi client. Supported values: internal, public, admin. The default is public.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

grafana_client¶

See https://docs.openstack.org/watcher/latest/datasources/grafana.html for details on how these options are used.

token¶

Type: string
Default: <None>

Authentication token to gain access

base_url¶

Type: string
Default: <None>

First part of the url (including https:// or http://) up until project id part. Example: https://secure.org/api/datasource/proxy/

project_id_map¶

Type: dict
Default: {'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to grafana project ids. Dictionary values should be positive integers. Example: 7465

database_map¶

Type: dict
Default: {'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to grafana databases. Values should be strings. Example: influx_production

attribute_map¶

Type: dict
Default: {'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to resource attributes. For a complete list of available attributes see https://docs.openstack.org/watcher/latest/datasources/grafana.html#attribute Values should be strings. Example: hostname

translator_map¶

Type: dict
Default: {'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to grafana translators. Values should be strings. Example: influxdb

query_map¶

Type: dict
Default: {'host_cpu_usage': None, 'host_ram_usage': None, 'host_outlet_temp': None, 'host_inlet_temp': None, 'host_airflow': None, 'host_power': None, 'instance_cpu_usage': None, 'instance_ram_usage': None, 'instance_ram_allocated': None, 'instance_l3_cache_usage': None, 'instance_root_disk_size': None}

Mapping of datasource metrics to grafana queries. Values should be strings for which the .format method will transform it. The transformation offers five parameters to the query labeled {0} to {4}. {0} will be replaced with the aggregate, {1} with the resource attribute, {2} with the period, {3} with the granularity and {4} with translator specifics for InfluxDB this will be the retention period. These queries will need to be constructed using tools such as Postman. Example: SELECT cpu FROM {4}.cpu_percent WHERE host == ‘{1}’ AND time > now()-{2}s

grafana_translators¶

retention_periods¶

Type: dict
Default: {'one_week': 604800, 'one_month': 2592000, 'five_years': 31556952}

Keys are the names of retention periods in InfluxDB and the values should correspond with the maximum time they can retain in seconds. Example: {‘one_day’: 86400}

ironic_client¶

api_version¶

Type: string
Default: 1

Version of Ironic API to use in ironicclient.

endpoint_type¶

Type: string
Default: publicURL

Type of endpoint to use in ironicclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

keystone_authtoken¶

www_authenticate_uri¶

Type: string
Default: <None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

Deprecated Variations¶
Group	Name
keystone_authtoken	auth_uri

auth_uri¶

Type: string
Default: <None>

Warning

This option is deprecated for removal since Queens. Its value may be silently ignored in the future.

Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

auth_version¶

Type: string
Default: <None>

API version of the Identity API endpoint.

interface¶

Type: string
Default: internal

Interface to use for the Identity API endpoint. Valid values are “public”, “internal” (default) or “admin”.

delay_auth_decision¶

Type: boolean
Default: False

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

http_connect_timeout¶

Type: integer
Default: <None>

Request timeout value for communicating with Identity API server.

http_request_max_retries¶

Type: integer
Default: 3

How many times are we trying to reconnect when communicating with Identity API Server.

cache¶

Type: string
Default: <None>

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

certfile¶

Type: string
Default: <None>

Required if identity server requires client certificate

keyfile¶

Type: string
Default: <None>

Required if identity server requires client certificate

cafile¶

Type: string
Default: <None>

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

region_name¶

Type: string
Default: <None>

The region in which the identity server can be found.

memcached_servers¶

Type: list
Default: <None>

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

Deprecated Variations¶
Group	Name
keystone_authtoken	memcache_servers

token_cache_time¶

Type: integer
Default: 300

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

memcache_security_strategy¶

Type: string
Default: None
Valid Values: None, MAC, ENCRYPT

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_secret_key¶

Type: string
Default: <None>

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_pool_dead_retry¶

Type: integer
Default: 300

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize¶

Type: integer
Default: 10

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout¶

Type: integer
Default: 3

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout¶

Type: integer
Default: 60

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_pool_conn_get_timeout¶

Type: integer
Default: 10

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_use_advanced_pool¶

Type: boolean
Default: True

(Optional) Use the advanced (eventlet safe) memcached client pool.

include_service_catalog¶

Type: boolean
Default: True

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

enforce_token_bind¶

Type: string
Default: permissive

Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

service_token_roles¶

Type: list
Default: ['service']

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required¶

Type: boolean
Default: False

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

service_type¶

Type: string
Default: <None>

The name or type of the service as it appears in the service catalog. This is used to validate tokens that have restricted access rules.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
keystone_authtoken	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

keystone_client¶

interface¶

Type: string
Default: admin
Valid Values: internal, public, admin

Type of endpoint to use in keystoneclient.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

monasca_client¶

api_version¶

Type: string
Default: 2_0

Version of Monasca API to use in monascaclient.

interface¶

Type: string
Default: internal

Type of interface used for monasca endpoint. Supported values: internal, public, admin. The default is internal.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

neutron_client¶

api_version¶

Type: string
Default: 2.0

Version of Neutron API to use in neutronclient.

endpoint_type¶

Type: string
Default: publicURL

Type of endpoint to use in neutronclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

nova_client¶

api_version¶

Type: string
Default: 2.56

Version of Nova API to use in novaclient.

Minimum required version: 2.56

Certain Watcher features depend on a minimum version of the compute API being available which is enforced with this option. See https://docs.openstack.org/nova/latest/reference/api-microversion-history.html for the compute API microversion history.

endpoint_type¶

Type: string
Default: publicURL

Type of endpoint to use in novaclient. Supported values: internalURL, publicURL, adminURL. The default is publicURL.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

oslo_concurrency¶

disable_process_locking¶

Type: boolean
Default: False

Enables or disables inter-process locks.

Deprecated Variations¶
Group	Name
DEFAULT	disable_process_locking

lock_path¶

Type: string
Default: <None>

Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.

Deprecated Variations¶
Group	Name
DEFAULT	lock_path

oslo_messaging_amqp¶

container_name¶

Type: string
Default: <None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations¶
Group	Name
amqp1	container_name

idle_timeout¶

Type: integer
Default: 0

Timeout for inactive connections (in seconds)

Deprecated Variations¶
Group	Name
amqp1	idle_timeout

trace¶

Type: boolean
Default: False

Debug: dump AMQP frames to stdout

Deprecated Variations¶
Group	Name
amqp1	trace

ssl¶

Type: boolean
Default: False

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file¶

Type: string
Default: ''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations¶
Group	Name
amqp1	ssl_ca_file

ssl_cert_file¶

Type: string
Default: ''

Self-identifying certificate PEM file for client authentication

Deprecated Variations¶
Group	Name
amqp1	ssl_cert_file

ssl_key_file¶

Type: string
Default: ''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations¶
Group	Name
amqp1	ssl_key_file

ssl_key_password¶

Type: string
Default: <None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations¶
Group	Name
amqp1	ssl_key_password

ssl_verify_vhost¶

Type: boolean
Default: False

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

sasl_mechanisms¶

Type: string
Default: ''

Space separated list of acceptable SASL mechanisms

Deprecated Variations¶
Group	Name
amqp1	sasl_mechanisms

sasl_config_dir¶

Type: string
Default: ''

Path to directory that contains the SASL configuration

Deprecated Variations¶
Group	Name
amqp1	sasl_config_dir

sasl_config_name¶

Type: string
Default: ''

Name of configuration file (without .conf suffix)

Deprecated Variations¶
Group	Name
amqp1	sasl_config_name

sasl_default_realm¶

Type: string
Default: ''

SASL realm to use if no realm present in username

connection_retry_interval¶

Type: integer
Default: 1
Minimum Value: 1

Seconds to pause before attempting to re-connect.

connection_retry_backoff¶

Type: integer
Default: 2
Minimum Value: 0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max¶

Type: integer
Default: 30
Minimum Value: 1

Maximum limit for connection_retry_interval + connection_retry_backoff

link_retry_delay¶

Type: integer
Default: 10
Minimum Value: 1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry¶

Type: integer
Default: 0
Minimum Value: -1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for an rpc reply message delivery.

default_send_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout¶

Type: integer
Default: 600
Minimum Value: 1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode¶

Type: string
Default: dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost¶

Type: boolean
Default: True

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix¶

Type: string
Default: exclusive

address prefix used when sending to a specific server

Deprecated Variations¶
Group	Name
amqp1	server_request_prefix

broadcast_prefix¶

Type: string
Default: broadcast

address prefix used when broadcasting to all servers

Deprecated Variations¶
Group	Name
amqp1	broadcast_prefix

group_request_prefix¶

Type: string
Default: unicast

address prefix when sending to any server in group

Deprecated Variations¶
Group	Name
amqp1	group_request_prefix

rpc_address_prefix¶

Type: string
Default: openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix¶

Type: string
Default: openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address¶

Type: string
Default: multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address¶

Type: string
Default: unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address¶

Type: string
Default: anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange¶

Type: string
Default: <None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange¶

Type: string
Default: <None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

reply_link_credit¶

Type: integer
Default: 200
Minimum Value: 1

Window size for incoming RPC Reply messages.

rpc_server_credit¶

Type: integer
Default: 100
Minimum Value: 1

Window size for incoming RPC Request messages

notify_server_credit¶

Type: integer
Default: 100
Minimum Value: 1

Window size for incoming Notification messages

pre_settled¶

Type: multi-valued
Default: rpc-cast
Default: rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka¶

kafka_max_fetch_bytes¶

Type: integer
Default: 1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout¶

Type: floating point
Default: 1.0

Default timeout(s) for Kafka consumers

pool_size¶

Type: integer
Default: 10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

conn_pool_min_size¶

Type: integer
Default: 2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

conn_pool_ttl¶

Type: integer
Default: 1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

consumer_group¶

Type: string
Default: oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout¶

Type: floating point
Default: 0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size¶

Type: integer
Default: 16384

Size of batch for the producer async send

compression_codec¶

Type: string
Default: none
Valid Values: none, gzip, snappy, lz4, zstd

The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version

enable_auto_commit¶

Type: boolean
Default: False

Enable asynchronous consumer commits

max_poll_records¶

Type: integer
Default: 500

The maximum number of records returned in a poll call

security_protocol¶

Type: string
Default: PLAINTEXT
Valid Values: PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism¶

Type: string
Default: PLAIN

Mechanism when security protocol is SASL

ssl_cafile¶

Type: string
Default: ''

CA certificate PEM file used to verify the server certificate

ssl_client_cert_file¶

Type: string
Default: ''

Client certificate PEM file used for authentication.

ssl_client_key_file¶

Type: string
Default: ''

Client key PEM file used for authentication.

ssl_client_key_password¶

Type: string
Default: ''

Client key password file used for authentication.

oslo_messaging_notifications¶

driver¶

Type: multi-valued
Default: ''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations¶
Group	Name
DEFAULT	notification_driver

transport_url¶

Type: string
Default: <None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations¶
Group	Name
DEFAULT	notification_transport_url

topics¶

Type: list
Default: ['notifications']

AMQP topic used for OpenStack notifications.

Deprecated Variations¶
Group	Name
rpc_notifier2	topics
DEFAULT	notification_topics

retry¶

Type: integer
Default: -1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit¶

amqp_durable_queues¶

Type: boolean
Default: False

Use durable queues in AMQP.

amqp_auto_delete¶

Type: boolean
Default: False

Auto-delete queues in AMQP.

Deprecated Variations¶
Group	Name
DEFAULT	amqp_auto_delete

ssl¶

Type: boolean
Default: False

Connect over SSL.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	rabbit_use_ssl

ssl_version¶

Type: string
Default: ''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_version

ssl_key_file¶

Type: string
Default: ''

SSL key file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_keyfile

ssl_cert_file¶

Type: string
Default: ''

SSL cert file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_certfile

ssl_ca_file¶

Type: string
Default: ''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_ca_certs

heartbeat_in_pthread¶

Type: boolean
Default: True

Run the health check heartbeat thread through a native python thread by default. If this option is equal to False then the health check heartbeat will inherit the execution model from the parent process. For example if the parent process has monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

kombu_reconnect_delay¶

Type: floating point
Default: 1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations¶
Group	Name
DEFAULT	kombu_reconnect_delay

kombu_compression¶

Type: string
Default: <None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout¶

Type: integer
Default: 60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_reconnect_timeout

kombu_failover_strategy¶

Type: string
Default: round-robin
Valid Values: round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_login_method¶

Type: string
Default: AMQPLAIN
Valid Values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_login_method

rabbit_retry_interval¶

Type: integer
Default: 1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff¶

Type: integer
Default: 2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_retry_backoff

rabbit_interval_max¶

Type: integer
Default: 30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_ha_queues¶

Type: boolean
Default: False

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_ha_queues

rabbit_transient_queues_ttl¶

Type: integer
Default: 1800
Minimum Value: 1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count¶

Type: integer
Default: 0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold¶

Type: integer
Default: 60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).

heartbeat_rate¶

Type: integer
Default: 2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

direct_mandatory_flag¶

Type: boolean
Default: True

(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Mandatory flag no longer deactivable.

enable_cancel_on_failover¶

Type: boolean
Default: False

Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down

oslo_policy¶

enforce_scope¶

Type: boolean
Default: False

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

enforce_new_defaults¶

Type: boolean
Default: False

This option controls whether or not to use old deprecated defaults when evaluating policies. If True, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with the enforce_scope flag so that you can get the benefits of new defaults and scope_type together

policy_file¶

Type: string
Default: policy.json

The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.

Deprecated Variations¶
Group	Name
DEFAULT	policy_file

policy_default_rule¶

Type: string
Default: default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations¶
Group	Name
DEFAULT	policy_default_rule

policy_dirs¶

Type: multi-valued
Default: policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations¶
Group	Name
DEFAULT	policy_dirs

remote_content_type¶

Type: string
Default: application/x-www-form-urlencoded
Valid Values: application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt¶

Type: boolean
Default: False

server identity verification for REST based policy check

remote_ssl_ca_crt_file¶

Type: string
Default: <None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file¶

Type: string
Default: <None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file¶

Type: string
Default: <None>

Absolute path client key file REST based policy check

oslo_reports¶

log_dir¶

Type: string
Default: <None>

Path to a log directory where to create a file

file_event_handler¶

Type: string
Default: <None>

The path to a file to watch for changes to trigger the reports, instead of signals. Setting this option disables the signal trigger for the reports. If application is running as a WSGI application it is recommended to use this instead of signals.

file_event_handler_interval¶

Type: integer
Default: 1

How many seconds to wait between polls when file_event_handler is set

placement_client¶

Configuration options for connecting to the placement API service

api_version¶

Type: string
Default: 1.29

microversion of placement API when using placement service.

interface¶

Type: string
Default: public
Valid Values: internal, public, admin

Type of endpoint when using placement service.

region_name¶

Type: string
Default: <None>

Region in Identity service catalog to use for communication with the OpenStack service.

watcher_applier¶

workers¶

Type: integer
Default: 1
Minimum Value: 1

Number of workers for applier, default value is 1.

conductor_topic¶

Type: string
Default: watcher.applier.control

The topic name used for control events, this topic used for rpc call

publisher_id¶

Type: string
Default: watcher.applier.api

The identifier used by watcher module on the message broker

workflow_engine¶

Type: string
Default: taskflow

Select the engine to use to execute the workflow

rollback_when_actionplan_failed¶

Type: boolean
Default: False

If set True, the failed actionplan will rollback when executing. Defaule value is False.

watcher_clients_auth¶

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
watcher_clients_auth	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

watcher_cluster_data_model_collectors.baremetal¶

period¶

Type: integer
Default: 3600

The time interval (in seconds) between each synchronization of the model

watcher_cluster_data_model_collectors.compute¶

period¶

Type: integer
Default: 3600

The time interval (in seconds) between each synchronization of the model

watcher_cluster_data_model_collectors.storage¶

period¶

Type: integer
Default: 3600

The time interval (in seconds) between each synchronization of the model

watcher_datasources¶

datasources¶

Type: list
Default: ['gnocchi', 'ceilometer', 'monasca', 'grafana']

Datasources to use in order to query the needed metrics. If one of strategy metric is not available in the first datasource, the next datasource will be chosen. This is the default for all strategies unless a strategy has a specific override.

query_max_retries¶

Type: integer
Default: 10
Minimum Value: 1
Mutable: This option can be changed without restarting.

How many times Watcher is trying to query again

Deprecated Variations¶
Group	Name
gnocchi_client	query_max_retries

query_timeout¶

Type: integer
Default: 1
Minimum Value: 0
Mutable: This option can be changed without restarting.

How many seconds Watcher should wait to do query again

Deprecated Variations¶
Group	Name
gnocchi_client	query_timeout

watcher_decision_engine¶

conductor_topic¶

Type: string
Default: watcher.decision.control

The topic name used for control events, this topic used for RPC calls

notification_topics¶

Type: list
Default: ['nova.versioned_notifications', 'watcher.watcher_notifications']

The exchange and topic names from which notification events will be listened to. The exchange should be specified to get an ability to use pools.

publisher_id¶

Type: string
Default: watcher.decision.api

The identifier used by the Watcher module on the message broker

max_audit_workers¶

Type: integer
Default: 2

The maximum number of threads that can be used to execute audits in parallel.

max_general_workers¶

Type: integer
Default: 4

The maximum number of threads that can be used to execute general tasks in parallel. The number of general workers will not increase depending on the number of audit workers!

action_plan_expiry¶

Type: integer
Default: 24
Mutable: This option can be changed without restarting.

An expiry timespan(hours). Watcher invalidates any action plan for which its creation time -whose number of hours has been offset by this value- is older that the current time.

check_periodic_interval¶

Type: integer
Default: 1800
Mutable: This option can be changed without restarting.

Interval (in seconds) for checking action plan expiry.

metric_map_path¶

Type: string
Default: /etc/watcher/metric_map.yaml

Path to metric map yaml formatted file. The file contains a map per datasource whose keys are the metric names as recognized by watcher and the value is the real name of the metric in the datasource. For example:

monasca:
  instance_cpu_usage: VM_CPU
gnocchi:
  instance_cpu_usage: cpu_vm_util

This file is optional.

continuous_audit_interval¶

Type: integer
Default: 10
Mutable: This option can be changed without restarting.

Interval (in seconds) for checking newly created continuous audits.

watcher_planner¶

planner¶

Type: string
Default: weight

The selected planner used to schedule the actions

watcher_planners.weight¶

weights¶

Type: dict
Default: {'nop': 70, 'volume_migrate': 60, 'change_nova_service_state': 50, 'sleep': 40, 'migrate': 30, 'resize': 20, 'turn_host_to_acpi_s3_state': 10, 'change_node_power_state': 9}

These weights are used to schedule the actions. Action Plan will be build in accordance with sets of actions ordered by descending weights.Two action types cannot have the same weight.

parallelization¶

Type: dict
Default: {'turn_host_to_acpi_s3_state': 2, 'resize': 2, 'migrate': 2, 'sleep': 1, 'change_nova_service_state': 1, 'nop': 1, 'change_node_power_state': 2, 'volume_migrate': 2}

Number of actions to be run in parallel on a per action type basis.

watcher_planners.workload_stabilization¶

weights¶

Type: dict
Default: {'turn_host_to_acpi_s3_state': 0, 'resize': 1, 'migrate': 2, 'sleep': 3, 'change_nova_service_state': 4, 'nop': 5}

These weights are used to schedule the actions

watcher_strategies.basic¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

check_optimize_metadata¶

Type: boolean
Default: False

Check optimize metadata field in instance before migration

watcher_strategies.node_resource_consolidation¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.noisy_neighbor¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.outlet_temperature¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.storage_capacity_balance¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

ex_pools¶

Type: list
Default: ['local_vstorage']

exclude pools

watcher_strategies.uniform_airflow¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.vm_workload_consolidation¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.workload_balance¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_strategies.workload_stabilization¶

datasources¶

Type: list
Default: <None>

Datasources to use in order to query the needed metrics. This option overrides the global preference. options: [‘gnocchi’, ‘ceilometer’, ‘monasca’, ‘grafana’]

watcher_workflow_engines.taskflow¶

max_workers¶

Type: integer
Default: 8
Minimum Value: 1

Number of workers for taskflow engine to execute actions.

action_execution_rule¶

Type: dict
Default: {}

The execution rule for linked actions,the key is strategy name and value ALWAYS means all actions will be executed,value ANY means if previous action executes success, the next action will be ignored.None means ALWAYS.

watcher.conf

watcher.conf¶

DEFAULT¶

api¶

cache¶

ceilometer_client¶

cinder_client¶

collector¶

database¶

glance_client¶

gnocchi_client¶

grafana_client¶

grafana_translators¶

ironic_client¶

keystone_authtoken¶

keystone_client¶

monasca_client¶

neutron_client¶

nova_client¶

oslo_concurrency¶

oslo_messaging_amqp¶

oslo_messaging_kafka¶

oslo_messaging_notifications¶

oslo_messaging_rabbit¶

oslo_policy¶

oslo_reports¶

placement_client¶

watcher_applier¶

watcher_clients_auth¶

watcher_cluster_data_model_collectors.baremetal¶

watcher_cluster_data_model_collectors.compute¶

watcher_cluster_data_model_collectors.storage¶

watcher_datasources¶

watcher_decision_engine¶

watcher_planner¶

watcher_planners.weight¶

watcher_planners.workload_stabilization¶

watcher_strategies.basic¶

watcher_strategies.node_resource_consolidation¶

watcher_strategies.noisy_neighbor¶

watcher_strategies.outlet_temperature¶

watcher_strategies.storage_capacity_balance¶

watcher_strategies.uniform_airflow¶

watcher_strategies.vm_workload_consolidation¶

watcher_strategies.workload_balance¶

watcher_strategies.workload_stabilization¶

watcher_workflow_engines.taskflow¶

Watcher 6.0.1.dev4

Page Contents