VM Workload Consolidation Strategy

updated: 2019-04-01 01:33

VM Workload Consolidation Strategy¶

Synopsis¶

display name: VM Workload Consolidation Strategy

goal: vm_consolidation

VM Workload Consolidation Strategy

A load consolidation strategy based on heuristic first-fit algorithm which focuses on measured CPU utilization and tries to minimize hosts which have too much or too little load respecting resource capacity constraints.

This strategy produces a solution resulting in more efficient utilization of cluster resources using following four phases:

Offload phase - handling over-utilized resources

Consolidation phase - handling under-utilized resources

Solution optimization - reducing number of migrations

Disability of unused compute nodes

A capacity coefficients (cc) might be used to adjust optimization thresholds. Different resources may require different coefficient values as well as setting up different coefficient values in both phases may lead to to more efficient consolidation in the end. If the cc equals 1 the full resource capacity may be used, cc values lower than 1 will lead to resource under utilization and values higher than 1 will lead to resource overbooking. e.g. If targeted utilization is 80 percent of a compute node capacity, the coefficient in the consolidation phase will be 0.8, but may any lower value in the offloading phase. The lower it gets the cluster will appear more released (distributed) for the following consolidation phase.

As this strategy leverages VM live migration to move the load from one compute node to another, this feature needs to be set up correctly on all compute nodes within the cluster. This strategy assumes it is possible to live migrate any VM from an active compute node to any other active compute node.

Requirements¶

Metrics¶

The vm_workload_consolidation strategy requires the following metrics:

metric	service name	plugins	comment
`memory`	ceilometer	none
`disk.root.size`	ceilometer	none

The following metrics are not required but increase the accuracy of the strategy if available:

metric	service name	plugins	comment
`memory.resident`	ceilometer	none
`cpu_util`	ceilometer	none

Cluster data model¶

Default Watcher’s Compute cluster data model:

Nova cluster data model collector

The Nova cluster data model collector creates an in-memory representation of the resources exposed by the compute service.

Actions¶

Default Watcher’s actions:

action description
migration
Migrates a server to a destination nova-compute host

This action will allow you to migrate a server to another compute destination host. Migration type ‘live’ can only be used for migrating active VMs. Migration type ‘cold’ can be used for migrating non-active VMs as well active VMs, which will be shut down while migrating.

The action schema is:
schema = Schema({
 'resource_id': str,  # should be a UUID
 'migration_type': str,  # choices -> "live", "cold"
 'destination_node': str,
 'source_node': str,
})
The resource_id is the UUID of the server to migrate. The source_node and destination_node parameters are respectively the source and the destination compute hostname (list of available compute hosts is returned by this command: nova service-list --binary nova-compute).
change_nova_service_state
Disables or enables the nova-compute service, deployed on a host

By using this action, you will be able to update the state of a nova-compute service. A disabled nova-compute service can not be selected by the nova scheduler for future deployment of server.

The action schema is:
schema = Schema({
 'resource_id': str,
 'state': str,
 'disabled_reason': str,
})
The resource_id references a nova-compute service name (list of available nova-compute services is returned by this command: nova service-list --binary nova-compute). The state value should either be ONLINE or OFFLINE. The disabled_reason references the reason why Watcher disables this nova-compute service. The value should be with watcher_ prefix, such as watcher_disabled, watcher_maintaining.

action	description
`migration`	Migrates a server to a destination nova-compute host This action will allow you to migrate a server to another compute destination host. Migration type ‘live’ can only be used for migrating active VMs. Migration type ‘cold’ can be used for migrating non-active VMs as well active VMs, which will be shut down while migrating. The action schema is: schema = Schema({ 'resource_id': str, # should be a UUID 'migration_type': str, # choices -> "live", "cold" 'destination_node': str, 'source_node': str, }) The resource_id is the UUID of the server to migrate. The source_node and destination_node parameters are respectively the source and the destination compute hostname (list of available compute hosts is returned by this command: `nova service-list --binary nova-compute`).
`change_nova_service_state`	Disables or enables the nova-compute service, deployed on a host By using this action, you will be able to update the state of a nova-compute service. A disabled nova-compute service can not be selected by the nova scheduler for future deployment of server. The action schema is: schema = Schema({ 'resource_id': str, 'state': str, 'disabled_reason': str, }) The resource_id references a nova-compute service name (list of available nova-compute services is returned by this command: `nova service-list --binary nova-compute`). The state value should either be ONLINE or OFFLINE. The disabled_reason references the reason why Watcher disables this nova-compute service. The value should be with watcher_ prefix, such as watcher_disabled, watcher_maintaining.

Planner¶

Default Watcher’s planner:

Weight planner implementation

This implementation builds actions with parents in accordance with weights. Set of actions having a higher weight will be scheduled before the other ones. There are two config options to configure: action_weights and parallelization.

Limitations

This planner requires to have action_weights and parallelization configs tuned well.

Configuration¶

Strategy parameter is:

parameter	type	default Value	description
`period`	Number	3600	The time interval in seconds for getting statistic aggregation from metric data source

Efficacy Indicator¶

[{'value': 0, 'name': 'released_nodes_ratio', 'unit': '%', 'description': u'Ratio of released compute nodes divided by the total number of enabled compute nodes.'}]

Algorithm¶

For more information on the VM Workload consolidation strategy please refer to: https://specs.openstack.org/openstack/watcher-specs/specs/mitaka/implemented/zhaw-load-consolidation.html

How to use it ?¶

$ openstack optimize audittemplate create \
  at1 server_consolidation --strategy vm_workload_consolidation

$ openstack optimize audit create -a at1

External Links¶

Spec URL https://specs.openstack.org/openstack/watcher-specs/specs/mitaka/implemented/zhaw-load-consolidation.html