Trove Sample Configuration File¶
Configure Trove by editing /etc/trove/trove.conf.
No config file is provided with the source code, it will be created during the installation. In case where no configuration file was installed, one can be easily created by running:
tox -e genconfig
To see configuration options available, please refer to Trove Configuration Options.
The following is a sample Trove configuration for adaptation and use. It is auto-generated from Trove when this documentation is built, and can also be viewed in file form.
[DEFAULT]
#
# From oslo.log
#
# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false
# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, log-date-format). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>
# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S
# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>
# (Optional) The base directory used for relative log_file paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>
# DEPRECATED: Uses logging handler designed to watch file system. When log file
# is moved or removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and
# Linux platform is used. This option is ignored if log_config_append is set.
# (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: This function is known to have bene broken for long time, and depends
# on the unmaintained library
#watch_log_file = false
# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append
# is set. (boolean value)
#use_syslog = false
# Enable journald for logging. If running in a systemd environment you may wish
# to enable journal support. Doing so will use the journal native protocol
# which includes structured metadata in addition to log messages.This option is
# ignored if log_config_append is set. (boolean value)
#use_journal = false
# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER
# Use JSON formatting for logging. This option is ignored if log_config_append
# is set. (boolean value)
#use_json = false
# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = false
# DEPRECATED: Log output to Windows Event Log. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Windows support is no longer maintained.
#use_eventlog = false
# (Optional) Set the 'color' key according to log levels. This option takes
# effect only when logging to stderr or stdout is used. This option is ignored
# if log_config_append is set. (boolean value)
#log_color = false
# The amount of time before the log files are rotated. This option is ignored
# unless log_rotation_type is set to "interval". (integer value)
#log_rotate_interval = 1
# Rotation interval type. The time of the last file change (or the time when
# the service was started) is used when scheduling the next rotation. (string
# value)
# Possible values:
# Seconds - <No description provided>
# Minutes - <No description provided>
# Hours - <No description provided>
# Days - <No description provided>
# Weekday - <No description provided>
# Midnight - <No description provided>
#log_rotate_interval_type = days
# Maximum number of rotated log files. (integer value)
#max_logfile_count = 30
# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
# not set to "size". (integer value)
#max_logfile_size_mb = 200
# Log rotation type. (string value)
# Possible values:
# interval - Rotate logs at predefined time intervals.
# size - Rotate logs once they reach a predefined size.
# none - Do not rotate log files.
#log_rotation_type = none
# Format string to use for log messages with context. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s
# Format string to use for log messages when context is undefined. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
# Additional data to append to log message when logging level for the message
# is DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
# Prefix each line of exception output with this format. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
# (string value)
#logging_user_identity_format = %(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s
# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
# Enables or disables publication of error events. (boolean value)
#publish_errors = false
# The format for an instance that is passed with the log message. (string
# value)
#instance_format = "[instance: %(uuid)s] "
# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "
# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0
# Maximum number of logged messages per rate_limit_interval. (integer value)
#rate_limit_burst = 0
# Log level name used by rate limiting. Logs with level greater or equal to
# rate_limit_except_level are not filtered. An empty string means that all
# levels are filtered. (string value)
# Possible values:
# CRITICAL - <No description provided>
# ERROR - <No description provided>
# INFO - <No description provided>
# WARNING - <No description provided>
# DEBUG - <No description provided>
# '' - <No description provided>
#rate_limit_except_level = CRITICAL
# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false
#
# From oslo.messaging
#
# Size of RPC connection pool. (integer value)
# Minimum value: 1
#rpc_conn_pool_size = 30
# The pool size limit for connections expiration policy (integer value)
#conn_pool_min_size = 2
# The time-to-live in sec of idle connections in the pool (integer value)
#conn_pool_ttl = 1200
# Size of executor thread pool when executor is threading or eventlet. (integer
# value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64
# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60
# The network address and optional user credentials for connecting to the
# messaging backend, in URL format. The expected format is:
#
# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
#
# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
#
# For full details on the fields in the URL see the documentation of
# oslo_messaging.TransportURL at
# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
# (string value)
#transport_url = rabbit://
# The default exchange under which topics are scoped. May be overridden by an
# exchange name specified in the transport_url option. (string value)
#control_exchange = openstack
# Add an endpoint to answer to ping calls. Endpoint is named
# oslo_rpc_server_ping (boolean value)
#rpc_ping_enabled = false
[cache]
#
# From oslo.cache
#
# Prefix for building the configuration dictionary for the cache region. This
# should not need to be changed unless there is another dogpile.cache region
# with the same configuration name. (string value)
#config_prefix = cache.oslo
# Default TTL, in seconds, for any cached item in the dogpile.cache region.
# This applies to any cached method that doesn't have an explicit cache
# expiration time defined for it. (integer value)
# Minimum value: 1
#expiration_time = 600
# Expiration time in cache backend to purge expired records automatically. This
# should be greater than expiration_time and all cache_time options (integer
# value)
# Minimum value: 1
#backend_expiration_time = <None>
# Cache backend module. For eventlet-based or environments with hundreds of
# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
# recommended. For environments with less than 100 threaded servers, Memcached
# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
# environments with a single instance of the server can use the
# dogpile.cache.memory backend. (string value)
# Possible values:
# oslo_cache.memcache_pool - <No description provided>
# oslo_cache.dict - <No description provided>
# oslo_cache.mongo - <No description provided>
# oslo_cache.etcd3gw - <No description provided>
# dogpile.cache.pymemcache - <No description provided>
# dogpile.cache.memcached - <No description provided>
# dogpile.cache.pylibmc - <No description provided>
# dogpile.cache.bmemcached - <No description provided>
# dogpile.cache.dbm - <No description provided>
# dogpile.cache.redis - <No description provided>
# dogpile.cache.redis_sentinel - <No description provided>
# dogpile.cache.memory - <No description provided>
# dogpile.cache.memory_pickle - <No description provided>
# dogpile.cache.null - <No description provided>
#backend = dogpile.cache.null
# Arguments supplied to the backend module. Specify this option once per
# argument to be passed to the dogpile.cache backend. Example format:
# "<argname>:<value>". (multi valued)
#backend_argument =
# Proxy classes to import that will affect the way the dogpile.cache backend
# functions. See the dogpile.cache documentation on changing-backend-behavior.
# (list value)
#proxies =
# Global toggle for caching. (boolean value)
#enabled = false
# Extra debugging from the cache backend (cache keys, get/set/delete/etc
# calls). This is only really useful if you need to see the specific cache-
# backend get/set/delete calls with the keys/values. Typically this should be
# left set to false. (boolean value)
#debug_cache_backend = false
# Memcache servers in the format of "host:port". This is used by backends
# dependent on Memcached.If ``dogpile.cache.memcached`` or
# ``oslo_cache.memcache_pool`` is used and a given host refer to an IPv6 or a
# given domain refer to IPv6 then you should prefix the given address with the
# address family (``inet6``) (e.g ``inet6[::1]:11211``,
# ``inet6:[fd12:3456:789a:1::1]:11211``,
# ``inet6:[controller-0.internalapi]:11211``). If the address family is not
# given then these backends will use the default ``inet`` address family which
# corresponds to IPv4 (list value)
#memcache_servers = localhost:11211
# Number of seconds memcached server is considered dead before it is tried
# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
# (integer value)
#memcache_dead_retry = 300
# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
# oslo_cache.memcache_pool backends only). (floating point value)
#memcache_socket_timeout = 1.0
# Max total number of open connections to every memcached server.
# (oslo_cache.memcache_pool backend only). (integer value)
#memcache_pool_maxsize = 10
# Number of seconds a connection to memcached is held unused in the pool before
# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
#memcache_pool_unused_timeout = 60
# Number of seconds that an operation will wait to get a memcache client
# connection. (integer value)
#memcache_pool_connection_get_timeout = 10
# Global toggle if memcache will be flushed on reconnect.
# (oslo_cache.memcache_pool backend only). (boolean value)
#memcache_pool_flush_on_reconnect = false
# Enable the SASL(Simple Authentication and SecurityLayer) if the SASL_enable
# is true, else disable. (boolean value)
#memcache_sasl_enabled = false
# the user name for the memcached which SASL enabled (string value)
#memcache_username = <None>
# the password for the memcached which SASL enabled (string value)
#memcache_password = <None>
# Redis server in the format of "host:port" (string value)
#redis_server = localhost:6379
# Database id in Redis server (integer value)
# Minimum value: 0
#redis_db = 0
# the user name for redis (string value)
#redis_username = <None>
# the password for redis (string value)
#redis_password = <None>
# Redis sentinel servers in the format of "host:port" (list value)
#redis_sentinels = localhost:26379
# Timeout in seconds for every call to a server. (dogpile.cache.redis and
# dogpile.cache.redis_sentinel backends only). (floating point value)
#redis_socket_timeout = 1.0
# Service name of the redis sentinel cluster. (string value)
#redis_sentinel_service_name = mymaster
# Global toggle for TLS usage when communicating with the caching servers.
# Currently supported by ``dogpile.cache.bmemcache``,
# ``dogpile.cache.pymemcache``, ``oslo_cache.memcache_pool``,
# ``dogpile.cache.redis`` and ``dogpile.cache.redis_sentinel``. (boolean value)
#tls_enabled = false
# Path to a file of concatenated CA certificates in PEM format necessary to
# establish the caching servers' authenticity. If tls_enabled is False, this
# option is ignored. (string value)
#tls_cafile = <None>
# Path to a single file in PEM format containing the client's certificate as
# well as any number of CA certificates needed to establish the certificate's
# authenticity. This file is only required when client side authentication is
# necessary. If tls_enabled is False, this option is ignored. (string value)
#tls_certfile = <None>
# Path to a single file containing the client's private key in. Otherwise the
# private key will be taken from the file specified in tls_certfile. If
# tls_enabled is False, this option is ignored. (string value)
#tls_keyfile = <None>
# Set the available ciphers for sockets created with the TLS context. It should
# be a string in the OpenSSL cipher list format. If not specified, all OpenSSL
# enabled ciphers will be available. Currently supported by
# ``dogpile.cache.bmemcache``, ``dogpile.cache.pymemcache`` and
# ``oslo_cache.memcache_pool``. (string value)
#tls_allowed_ciphers = <None>
# Global toggle for the socket keepalive of dogpile's pymemcache backend
# (boolean value)
#enable_socket_keepalive = false
# The time (in seconds) the connection needs to remain idle before TCP starts
# sending keepalive probes. Should be a positive integer most greater than
# zero. (integer value)
# Minimum value: 0
#socket_keepalive_idle = 1
# The time (in seconds) between individual keepalive probes. Should be a
# positive integer greater than zero. (integer value)
# Minimum value: 0
#socket_keepalive_interval = 1
# The maximum number of keepalive probes TCP should send before dropping the
# connection. Should be a positive integer greater than zero. (integer value)
# Minimum value: 0
#socket_keepalive_count = 1
# Enable retry client mechanisms to handle failure. Those mechanisms can be
# used to wrap all kind of pymemcache clients. The wrapper allows you to define
# how many attempts to make and how long to wait between attemots. (boolean
# value)
#enable_retry_client = false
# Number of times to attempt an action before failing. (integer value)
# Minimum value: 1
#retry_attempts = 2
# Number of seconds to sleep between each attempt. (floating point value)
#retry_delay = 0
# Amount of times a client should be tried before it is marked dead and removed
# from the pool in the HashClient's internal mechanisms. (integer value)
# Minimum value: 1
#hashclient_retry_attempts = 2
# Time in seconds that should pass between retry attempts in the HashClient's
# internal mechanisms. (floating point value)
#hashclient_retry_delay = 1
# Time in seconds before attempting to add a node back in the pool in the
# HashClient's internal mechanisms. (floating point value)
#dead_timeout = 60
# Global toggle for enforcing the OpenSSL FIPS mode. This feature requires
# Python support. This is available in Python 3.9 in all environments and may
# have been backported to older Python versions on select environments. If the
# Python executable used does not support OpenSSL FIPS mode, an exception will
# be raised. Currently supported by ``dogpile.cache.bmemcache``,
# ``dogpile.cache.pymemcache`` and ``oslo_cache.memcache_pool``. (boolean
# value)
#enforce_fips_mode = false
[cors]
#
# From oslo.middleware.cors
#
# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
# slash. Example: https://horizon.example.com (list value)
#allowed_origin = <None>
# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true
# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers =
# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600
# Indicate which methods can be used during the actual request. (list value)
#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers =
[database]
#
# From oslo.db
#
# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true
# The back end to use for the database. (string value)
#backend = sqlalchemy
# The SQLAlchemy connection string to use to connect to the database. (string
# value)
#connection = <None>
# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>
# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set
# by the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL
# For Galera only, configure wsrep_sync_wait causality checks on new
# connections. Default is None, meaning don't configure any setting. (integer
# value)
#mysql_wsrep_sync_wait = <None>
# Connections which have been present in the connection pool longer than this
# number of seconds will be replaced with a new one the next time they are
# checked out from the pool. (integer value)
#connection_recycle_time = 3600
# Maximum number of SQL connections to keep open in a pool. Setting a value of
# 0 indicates no limit. (integer value)
#max_pool_size = 5
# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
#max_retries = 10
# Interval between retries of opening a SQL connection. (integer value)
#retry_interval = 10
# If set, use this value for max_overflow with SQLAlchemy. (integer value)
#max_overflow = 50
# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Minimum value: 0
# Maximum value: 100
#connection_debug = 0
# Add Python stack traces to SQL as comment strings. (boolean value)
#connection_trace = false
# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
#pool_timeout = <None>
# Enable the experimental use of database reconnect on connection lost.
# (boolean value)
#use_db_reconnect = false
# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1
# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true
# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10
# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20
# Optional URL parameters to append onto the connection URL at connect time;
# specify as param1=value1¶m2=value2&... (string value)
#connection_parameters =
[healthcheck]
#
# From oslo.middleware.healthcheck
#
# DEPRECATED: The path to respond to healtcheck requests on. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#path = /healthcheck
# Show more detailed information as part of the response. Security note:
# Enabling this option may expose sensitive details about the service being
# monitored. Be sure to verify that it will not violate your security policies.
# (boolean value)
#detailed = false
# Additional backends that can perform health checks and report that
# information back as part of a request. (list value)
#backends =
# A list of network addresses to limit source ip allowed to access healthcheck
# information. Any request from ip outside of these network addresses are
# ignored. (list value)
#allowed_source_ranges =
# Ignore requests with proxy headers. (boolean value)
#ignore_proxied_requests = false
# Check the presence of a file to determine if an application is running on a
# port. Used by DisableByFileHealthcheck plugin. (string value)
#disable_by_file_path = <None>
# Check the presence of a file based on a port to determine if an application
# is running on a port. Expects a "port:path" list of strings. Used by
# DisableByFilesPortsHealthcheck plugin. (list value)
#disable_by_file_paths =
# Check the presence of files. Used by EnableByFilesHealthcheck plugin. (list
# value)
#enable_by_file_paths =
[oslo_messaging_kafka]
#
# From oslo.messaging
#
# Max fetch bytes of Kafka consumer (integer value)
#kafka_max_fetch_bytes = 1048576
# Default timeout(s) for Kafka consumers (floating point value)
#kafka_consumer_timeout = 1.0
# DEPRECATED: Pool Size for Kafka Consumers (integer value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#pool_size = 10
# DEPRECATED: The pool size limit for connections expiration policy (integer
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#conn_pool_min_size = 2
# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Driver no longer uses connection pool.
#conn_pool_ttl = 1200
# Group id for Kafka consumer. Consumers in one group will coordinate message
# consumption (string value)
#consumer_group = oslo_messaging_consumer
# Upper bound on the delay for KafkaProducer batching in seconds (floating
# point value)
#producer_batch_timeout = 0.0
# Size of batch for the producer async send (integer value)
#producer_batch_size = 16384
# The compression codec for all data generated by the producer. If not set,
# compression will not be used. Note that the allowed values of this depend on
# the kafka version (string value)
# Possible values:
# none - <No description provided>
# gzip - <No description provided>
# snappy - <No description provided>
# lz4 - <No description provided>
# zstd - <No description provided>
#compression_codec = none
# Enable asynchronous consumer commits (boolean value)
#enable_auto_commit = false
# The maximum number of records returned in a poll call (integer value)
#max_poll_records = 500
# Protocol used to communicate with brokers (string value)
# Possible values:
# PLAINTEXT - <No description provided>
# SASL_PLAINTEXT - <No description provided>
# SSL - <No description provided>
# SASL_SSL - <No description provided>
#security_protocol = PLAINTEXT
# Mechanism when security protocol is SASL (string value)
#sasl_mechanism = PLAIN
# CA certificate PEM file used to verify the server certificate (string value)
#ssl_cafile =
# Client certificate PEM file used for authentication. (string value)
#ssl_client_cert_file =
# Client key PEM file used for authentication. (string value)
#ssl_client_key_file =
# Client key password file used for authentication. (string value)
#ssl_client_key_password =
[oslo_messaging_notifications]
#
# From oslo.messaging
#
# The Drivers(s) to handle sending notifications. Possible values are
# messaging, messagingv2, routing, log, test, noop (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
#driver =
# A URL representing the messaging driver to use for notifications. If not set,
# we fall back to the same configuration used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
#transport_url = <None>
# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
#topics = notifications
# The maximum number of attempts to re-send a notification message which failed
# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
# (integer value)
#retry = -1
[oslo_messaging_rabbit]
#
# From oslo.messaging
#
# Use durable queues in AMQP. If rabbit_quorum_queue is enabled, queues will be
# durable and this value will be ignored. (boolean value)
#amqp_durable_queues = false
# Auto-delete queues in AMQP. (boolean value)
#amqp_auto_delete = false
# Connect over SSL. (boolean value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
#ssl = false
# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
#ssl_version =
# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
#ssl_key_file =
# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
#ssl_cert_file =
# SSL certification authority file (valid only if SSL enabled). (string value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
#ssl_ca_file =
# Global toggle for enforcing the OpenSSL FIPS mode. This feature requires
# Python support. This is available in Python 3.9 in all environments and may
# have been backported to older Python versions on select environments. If the
# Python executable used does not support OpenSSL FIPS mode, an exception will
# be raised. (boolean value)
#ssl_enforce_fips_mode = false
# DEPRECATED: (DEPRECATED) It is recommend not to use this option anymore. Run
# the health check heartbeat thread through a native python thread by default.
# If this option is equal to False then the health check heartbeat will inherit
# the execution model from the parent process. For example if the parent
# process has monkey patched the stdlib by using eventlet/greenlet then the
# heartbeat will be run through a green thread. This option should be set to
# True only for the wsgi services. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: The option is related to Eventlet which will be removed. In addition
# this has never worked as expected with services using eventlet for core
# service framework.
#heartbeat_in_pthread = false
# How long to wait (in seconds) before reconnecting in response to an AMQP
# consumer cancel notification. (floating point value)
# Minimum value: 0.0
# Maximum value: 4.5
#kombu_reconnect_delay = 1.0
# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
# be used. This option may not be available in future versions. (string value)
#kombu_compression = <None>
# How long to wait a missing client before abandoning to send it its replies.
# This value should not be longer than rpc_response_timeout. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60
# Determines how the next RabbitMQ node is chosen in case the one we are
# currently connected to becomes unavailable. Takes effect only if more than
# one RabbitMQ node is provided in config. (string value)
# Possible values:
# round-robin - <No description provided>
# shuffle - <No description provided>
#kombu_failover_strategy = round-robin
# The RabbitMQ login method. (string value)
# Possible values:
# PLAIN - <No description provided>
# AMQPLAIN - <No description provided>
# EXTERNAL - <No description provided>
# RABBIT-CR-DEMO - <No description provided>
#rabbit_login_method = AMQPLAIN
# How frequently to retry connecting with RabbitMQ. (integer value)
#rabbit_retry_interval = 1
# How long to backoff for between retries when connecting to RabbitMQ. (integer
# value)
#rabbit_retry_backoff = 2
# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
# (integer value)
#rabbit_interval_max = 30
# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
# is no longer controlled by the x-ha-policy argument when declaring a queue.
# If you just want to make sure that all queues (except those with auto-
# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
#rabbit_ha_queues = false
# Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum queue is a
# modern queue type for RabbitMQ implementing a durable, replicated FIFO queue
# based on the Raft consensus algorithm. It is available as of RabbitMQ 3.8.0.
# If set this option will conflict with the HA queues (``rabbit_ha_queues``)
# aka mirrored queues, in other words the HA queues should be disabled. Quorum
# queues are also durable by default so the amqp_durable_queues option is
# ignored when this option is enabled. (boolean value)
#rabbit_quorum_queue = false
# Use quorum queues for transients queues in RabbitMQ. Enabling this option
# will then make sure those queues are also using quorum kind of rabbit queues,
# which are HA by default. (boolean value)
#rabbit_transient_quorum_queue = false
# Each time a message is redelivered to a consumer, a counter is incremented.
# Once the redelivery count exceeds the delivery limit the message gets dropped
# or dead-lettered (if a DLX exchange has been configured) Used only when
# rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
# (integer value)
#rabbit_quorum_delivery_limit = 0
# By default all messages are maintained in memory if a quorum queue grows in
# length it can put memory pressure on a cluster. This option can limit the
# number of messages in the quorum queue. Used only when rabbit_quorum_queue is
# enabled, Default 0 which means dont set a limit. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_quroum_max_memory_length
#rabbit_quorum_max_memory_length = 0
# By default all messages are maintained in memory if a quorum queue grows in
# length it can put memory pressure on a cluster. This option can limit the
# number of memory bytes used by the quorum queue. Used only when
# rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.
# (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_quroum_max_memory_bytes
#rabbit_quorum_max_memory_bytes = 0
# Positive integer representing duration in seconds for queue TTL (x-expires).
# Queues which are unused for the duration of the TTL are automatically
# deleted. The parameter affects only reply and fanout queues. Setting 0 as
# value will disable the x-expires. If doing so, make sure you have a rabbitmq
# policy to delete the queues or you deployment will create an infinite number
# of queue over time.In case rabbit_stream_fanout is set to True, this option
# will control data retention policy (x-max-age) for messages in the fanout
# queue rather then the queue duration itself. So the oldest data in the stream
# queue will be discarded from it once reaching TTL Setting to 0 will disable
# x-max-age for stream which make stream grow indefinitely filling up the
# diskspace (integer value)
# Minimum value: 0
#rabbit_transient_queues_ttl = 1800
# Specifies the number of messages to prefetch. Setting to zero allows
# unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0
# Number of seconds after which the Rabbit broker is considered down if
# heartbeat's keep-alive fails (0 disables heartbeat). (integer value)
#heartbeat_timeout_threshold = 60
# How often times during the heartbeat_timeout_threshold we check the
# heartbeat. (integer value)
#heartbeat_rate = 3
# DEPRECATED: (DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for
# direct send. The direct send is used as reply, so the MessageUndeliverable
# exception is raised in case the client queue does not
# exist.MessageUndeliverable exception will be used to loop for a timeout to
# lets a chance to sender to recover.This flag is deprecated and it will not be
# possible to deactivate this functionality anymore (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Mandatory flag no longer deactivable.
#direct_mandatory_flag = true
# Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and
# notify consumerswhen queue is down (boolean value)
#enable_cancel_on_failover = false
# Should we use consistant queue names or random ones (boolean value)
#use_queue_manager = false
# Hostname used by queue manager. Defaults to the value returned by
# socket.gethostname(). (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#hostname = node1.example.com
# Process name used by queue manager (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#processname = nova-api
# Use stream queues in RabbitMQ (x-queue-type: stream). Streams are a new
# persistent and replicated data structure ("queue type") in RabbitMQ which
# models an append-only log with non-destructive consumer semantics. It is
# available as of RabbitMQ 3.9.0. If set this option will replace all fanout
# queues with only one stream queue. (boolean value)
#rabbit_stream_fanout = false
[oslo_middleware]
#
# From oslo.middleware.http_proxy_to_wsgi
#
# Whether the application is behind a proxy or not. This determines if the
# middleware should parse the headers or not. (boolean value)
#enable_proxy_headers_parsing = false
[oslo_policy]
#
# From oslo.policy
#
# DEPRECATED: This option controls whether or not to enforce scope when
# evaluating policies. If ``True``, the scope of the token used in the request
# is compared to the ``scope_types`` of the policy being enforced. If the
# scopes do not match, an ``InvalidScope`` exception will be raised. If
# ``False``, a message will be logged informing operators that policies are
# being invoked with mismatching scope. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: This configuration was added temporarily to facilitate a smooth
# transition to the new RBAC. OpenStack will always enforce scope checks. This
# configuration option is deprecated and will be removed in the 2025.2 cycle.
#enforce_scope = true
# This option controls whether or not to use old deprecated defaults when
# evaluating policies. If ``True``, the old deprecated defaults are not going
# to be evaluated. This means if any existing token is allowed for old defaults
# but is disallowed for new defaults, it will be disallowed. It is encouraged
# to enable this flag along with the ``enforce_scope`` flag so that you can get
# the benefits of new defaults and ``scope_type`` together. If ``False``, the
# deprecated policy check string is logically OR'd with the new policy check
# string, allowing for a graceful upgrade experience between releases with new
# policies, which is the default behavior. (boolean value)
#enforce_new_defaults = true
# The relative or absolute path of a file that maps roles to permissions for a
# given service. Relative paths must be specified in relation to the
# configuration file setting this option. (string value)
#policy_file = policy.yaml
# Default rule. Enforced when a requested rule is not found. (string value)
#policy_default_rule = default
# Directories where policy configuration files are stored. They can be relative
# to any directory in the search path defined by the config_dir option, or
# absolute paths. The file defined by policy_file must exist for these
# directories to be searched. Missing or empty directories are ignored. (multi
# valued)
#policy_dirs = policy.d
# Content Type to send and receive data for REST based policy check (string
# value)
# Possible values:
# application/x-www-form-urlencoded - <No description provided>
# application/json - <No description provided>
#remote_content_type = application/x-www-form-urlencoded
# server identity verification for REST based policy check (boolean value)
#remote_ssl_verify_server_crt = false
# Absolute path to ca cert file for REST based policy check (string value)
#remote_ssl_ca_crt_file = <None>
# Absolute path to client cert for REST based policy check (string value)
#remote_ssl_client_crt_file = <None>
# Absolute path client key file REST based policy check (string value)
#remote_ssl_client_key_file = <None>
# Timeout in seconds for REST based policy check (floating point value)
# Minimum value: 0
#remote_timeout = 60
[profiler]
#
# From osprofiler
#
#
# Enable the profiling for all services on this node.
#
# Default value is False (fully disable the profiling feature).
#
# Possible values:
#
# * True: Enables the feature
# * False: Disables the feature. The profiling cannot be started via this
# project
# operations. If the profiling is triggered by another project, this project
# part will be empty.
# (boolean value)
# Deprecated group/name - [profiler]/profiler_enabled
#enabled = false
#
# Enable SQL requests profiling in services.
#
# Default value is False (SQL requests won't be traced).
#
# Possible values:
#
# * True: Enables SQL requests profiling. Each SQL query will be part of the
# trace and can the be analyzed by how much time was spent for that.
# * False: Disables SQL requests profiling. The spent time is only shown on a
# higher level of operations. Single SQL queries cannot be analyzed this way.
# (boolean value)
#trace_sqlalchemy = false
#
# Enable python requests package profiling.
#
# Supported drivers: jaeger+otlp
#
# Default value is False.
#
# Possible values:
#
# * True: Enables requests profiling.
# * False: Disables requests profiling.
# (boolean value)
#trace_requests = false
#
# Secret key(s) to use for encrypting context data for performance profiling.
#
# This string value should have the following format:
# <key1>[,<key2>,...<keyn>],
# where each key is some random string. A user who triggers the profiling via
# the REST API has to set one of these keys in the headers of the REST API call
# to include profiling results of this node for this particular project.
#
# Both "enabled" flag and "hmac_keys" config options should be set to enable
# profiling. Also, to generate correct profiling information across all
# services
# at least one key needs to be consistent between OpenStack projects. This
# ensures it can be used from client side to generate the trace, containing
# information from all possible resources.
# (string value)
#hmac_keys = SECRET_KEY
#
# Connection string for a notifier backend.
#
# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
#
# Examples of possible values:
#
# * ``messaging://`` - use oslo_messaging driver for sending spans.
# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
# spans.
# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
# spans.
# (string value)
#connection_string = messaging://
#
# Document type for notification indexing in elasticsearch.
# (string value)
#es_doc_type = notification
#
# This parameter is a time value parameter (for example: es_scroll_time=2m),
# indicating for how long the nodes that participate in the search will
# maintain
# relevant resources in order to continue and support it.
# (string value)
#es_scroll_time = 2m
#
# Elasticsearch splits large requests in batches. This parameter defines
# maximum size of each batch (for example: es_scroll_size=10000).
# (integer value)
#es_scroll_size = 10000
#
# Redissentinel provides a timeout option on the connections.
# This parameter defines that timeout (for example: socket_timeout=0.1).
# (floating point value)
#socket_timeout = 0.1
#
# Redissentinel uses a service name to identify a master redis service.
# This parameter defines the name (for example:
# ``sentinal_service_name=mymaster``).
# (string value)
#sentinel_service_name = mymaster
#
# Enable filter traces that contain error/exception to a separated place.
#
# Default value is set to False.
#
# Possible values:
#
# * True: Enable filter traces that contain error/exception.
# * False: Disable the filter.
# (boolean value)
#filter_error_trace = false
[profiler_jaeger]
#
# From osprofiler
#
#
# Set service name prefix to Jaeger service name.
# (string value)
#service_name_prefix = <None>
#
# Set process tracer tags.
# (dict value)
#process_tags =
[profiler_otlp]
#
# From osprofiler
#
#
# Set service name prefix to OTLP exporters.
# (string value)
#service_name_prefix = <None>
