North South Networking via Multiple External Networks¶
The following figure illustrates one typical networking mode, instances have two interfaces, one interface is connected to net3 for heartbeat or data replication, the other interface is connected to net1 or net2 to provide service. There is different external network in different region to support service redundancy in case of region level failure.
+-----------------+ +-----------------+
| RegionOne | | RegionTwo |
| | | |
| ext_net1 | | ext_net2 |
| +-----+-----+ | | +-----+-----+ |
| | | | | |
| | | | | |
| +--+--+ | | +--+--+ |
| | | | | | | |
| | R1 | | | | R2 | |
| | | | | | | |
| +--+--+ | | +--+--+ |
| | | | | |
| | | | | |
| +---+-+-+ | | +---+-+-+ |
| net1 | | | net2 | |
| | | | | |
| +--------+--+ | | +--------+--+ |
| | Instance1 | | | | Instance2 | |
| +-----------+ | | +-----------+ |
| | | | | |
| | | net3 | | |
| +------+-------------------------+----+ |
| | | |
+-----------------+ +-----------------+
How to create this network topology¶
Create external network ext-net1, which will be located in RegionOne.
$ neutron --os-region-name=CentralRegion net-create --provider:network_type vlan --provider:physical_network extern --router:external --availability-zone-hint RegionOne ext-net1
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | RegionOne |
| id | 9b3d04be-0c00-40ed-88ff-088da6fcd8bd |
| name | ext-net1 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| provider:network_type | vlan |
| provider:physical_network | extern |
| provider:segmentation_id | 170 |
| router:external | True |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
+---------------------------+--------------------------------------+
Now you can also create flat type external network
$ neutron --os-region-name=CentralRegion net-create --provider:network_type flat --provider:physical_network extern --router:external --availability-zone-hint RegionOne ext-net1
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | RegionOne |
| id | 17d969a5-efe3-407f-9657-61658a4a5193 |
| name | ext-net1 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| provider:network_type | flat |
| provider:physical_network | extern |
| provider:segmentation_id | |
| router:external | True |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
+---------------------------+--------------------------------------+
Create subnet in ext-net1.
$ neutron --os-region-name=CentralRegion subnet-create --name ext-subnet1 --disable-dhcp ext-net1 163.3.124.0/24
+-------------------+--------------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------------+
| allocation_pools | {"start": "163.3.124.2", "end": "163.3.124.254"} |
| cidr | 163.3.124.0/24 |
| created_at | 2017-01-12T07:03:45Z |
| description | |
| dns_nameservers | |
| enable_dhcp | False |
| gateway_ip | 163.3.124.1 |
| host_routes | |
| id | a2eecc16-deb8-42a6-a41b-5058847ed20a |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | ext-subnet1 |
| network_id | 9b3d04be-0c00-40ed-88ff-088da6fcd8bd |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 2 |
| subnetpool_id | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:03:45Z |
+-------------------+--------------------------------------------------+
Create router R1.
$ neutron --os-region-name=CentralRegion router-create --availability-zone-hint RegionOne R1
+-------------------------+--------------------------------------+
| Field | Value |
+-------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | RegionOne |
| availability_zones | |
| created_at | 2017-01-12T07:04:13Z |
| description | |
| external_gateway_info | |
| id | 063de74b-d962-4fc2-96d9-87e2cb35c082 |
| name | R1 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 1 |
| status | ACTIVE |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:04:13Z |
+-------------------------+--------------------------------------+
Set the router gateway to ext-net1 for R1.
$ neutron --os-region-name=CentralRegion router-gateway-set R1 ext-net1
Set gateway for router R1
$ neutron --os-region-name=CentralRegion router-show R1
+-----------------------+------------------------------------------------------------------------------------------------------------+
| Field | Value |
+-----------------------+------------------------------------------------------------------------------------------------------------+
| admin_state_up | True |
| created_at | 2017-01-12T07:04:13Z |
| description | |
| external_gateway_info | {"network_id": "9b3d04be-0c00-40ed-88ff-088da6fcd8bd", "external_fixed_ips": [{"subnet_id": |
| | "a2eecc16-deb8-42a6-a41b-5058847ed20a", "ip_address": "163.3.124.5"}]} |
| id | 063de74b-d962-4fc2-96d9-87e2cb35c082 |
| name | R1 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 3 |
| status | ACTIVE |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:04:36Z |
+-----------------------+------------------------------------------------------------------------------------------------------------+
Create local network net1 which will reside in RegionOne, so you use RegionOne as the value of availability-zone-hint.
$ neutron --os-region-name=CentralRegion net-create --availability-zone-hint RegionOne net1
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | RegionOne |
| id | de4fda27-e4f7-4448-80f6-79ee5ea2478b |
| name | net1 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| provider:network_type | local |
| provider:physical_network | |
| provider:segmentation_id | |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
+---------------------------+--------------------------------------+
Create a subnet in net1.
$ neutron --os-region-name=CentralRegion subnet-create net1 10.0.1.0/24
+-------------------+--------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------+
| allocation_pools | {"start": "10.0.1.2", "end": "10.0.1.254"} |
| cidr | 10.0.1.0/24 |
| created_at | 2017-01-12T07:05:57Z |
| description | |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | 10.0.1.1 |
| host_routes | |
| id | 2c8f446f-ba02-4140-a793-913033aa3580 |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | |
| network_id | de4fda27-e4f7-4448-80f6-79ee5ea2478b |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 2 |
| subnetpool_id | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:05:57Z |
+-------------------+--------------------------------------------+
Add this subnet to router R1.
$ neutron --os-region-name=CentralRegion router-interface-add R1 2c8f446f-ba02-4140-a793-913033aa3580
Added interface d48a8e87-61a0-494b-bc06-54f7a008ea78 to router R1.
Create net3 which will work as the L2 network across RegionOne and RegionTwo.
If net3 is vlan based cross-Neutron L2 network
$ neutron --os-region-name=CentralRegion net-create --provider:network_type vlan --provider:physical_network bridge --availability-zone-hint az1 --availability-zone-hint az2 net3
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | az1 |
| | az2 |
| id | 68d04c60-469d-495d-bb23-0d36d56235bd |
| name | net3 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| provider:network_type | vlan |
| provider:physical_network | bridge |
| provider:segmentation_id | 138 |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
+---------------------------+--------------------------------------+
If net3 is vxlan based cross-Neutron L2 network
$ neutron --os-region-name=CentralRegion net-create --provider:network_type vxlan --availability-zone-hint az1 --availability-zone-hint az2 net3
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | az1 |
| | az2 |
| id | 0f171049-0c15-4d1b-95cd-ede8dc554b44 |
| name | net3 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| provider:network_type | vxlan |
| provider:physical_network | |
| provider:segmentation_id | 1031 |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
+---------------------------+--------------------------------------+
Create a subnet in net3.
$ neutron --os-region-name=CentralRegion subnet-create net3 10.0.3.0/24
+-------------------+--------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------+
| allocation_pools | {"start": "10.0.3.2", "end": "10.0.3.254"} |
| cidr | 10.0.3.0/24 |
| created_at | 2017-01-12T07:07:42Z |
| description | |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | 10.0.3.1 |
| host_routes | |
| id | 5ab92c3c-b799-451c-b5d5-b72274fb0fcc |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | |
| network_id | 68d04c60-469d-495d-bb23-0d36d56235bd |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 2 |
| subnetpool_id | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:07:42Z |
+-------------------+--------------------------------------------+
List the available images in RegionOne.
$ glance --os-region-name=RegionOne image-list
+--------------------------------------+---------------------------------+
| ID | Name |
+--------------------------------------+---------------------------------+
| 8747fd6a-72aa-4075-b936-a24bc48ed57b | cirros-0.3.4-x86_64-uec |
| 3a54e6fd-d215-437b-9d67-eac840c97f9c | cirros-0.3.4-x86_64-uec-kernel |
| 02b06834-2a9f-4dad-8d59-2a77963af8a5 | cirros-0.3.4-x86_64-uec-ramdisk |
+--------------------------------------+---------------------------------+
List the available flavors in RegionOne.
$ nova --os-region-name=RegionOne flavor-list
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
| 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
| 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
| 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
| 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
| c1 | cirros256 | 256 | 0 | 0 | | 1 | 1.0 | True |
| d1 | ds512M | 512 | 5 | 0 | | 1 | 1.0 | True |
| d2 | ds1G | 1024 | 10 | 0 | | 1 | 1.0 | True |
| d3 | ds2G | 2048 | 10 | 0 | | 2 | 1.0 | True |
| d4 | ds4G | 4096 | 20 | 0 | | 4 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
Boot instance1 in RegionOne, and connect this instance to net1 and net3.
$ nova --os-region-name=RegionOne boot --flavor 1 --image 8747fd6a-72aa-4075-b936-a24bc48ed57b --nic net-id=68d04c60-469d-495d-bb23-0d36d56235bd --nic net-id=de4fda27-e4f7-4448-80f6-79ee5ea2478b instance1
+--------------------------------------+----------------------------------------------------------------+
| Property | Value |
+--------------------------------------+----------------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | |
| OS-EXT-SRV-ATTR:host | - |
| OS-EXT-SRV-ATTR:hostname | instance1 |
| OS-EXT-SRV-ATTR:hypervisor_hostname | - |
| OS-EXT-SRV-ATTR:instance_name | |
| OS-EXT-SRV-ATTR:kernel_id | 3a54e6fd-d215-437b-9d67-eac840c97f9c |
| OS-EXT-SRV-ATTR:launch_index | 0 |
| OS-EXT-SRV-ATTR:ramdisk_id | 02b06834-2a9f-4dad-8d59-2a77963af8a5 |
| OS-EXT-SRV-ATTR:reservation_id | r-9cnhvave |
| OS-EXT-SRV-ATTR:root_device_name | - |
| OS-EXT-SRV-ATTR:user_data | - |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | zDFR3x8pDDKi |
| config_drive | |
| created | 2017-01-12T07:09:53Z |
| description | - |
| flavor | m1.tiny (1) |
| hostId | |
| host_status | |
| id | 3d53560e-4e04-43a0-b774-cfa3deecbca4 |
| image | cirros-0.3.4-x86_64-uec (8747fd6a-72aa-4075-b936-a24bc48ed57b) |
| key_name | - |
| locked | False |
| metadata | {} |
| name | instance1 |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tags | [] |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated | 2017-01-12T07:09:54Z |
| user_id | d2521e53aa8c4916b3a8e444f20cf1da |
+--------------------------------------+----------------------------------------------------------------+
Make sure the instance1 is active in RegionOne.
$ nova --os-region-name=RegionOne list
+--------------------------------------+-----------+--------+------------+-------------+-------------------------------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+-----------+--------+------------+-------------+-------------------------------+
| 3d53560e-4e04-43a0-b774-cfa3deecbca4 | instance1 | ACTIVE | - | Running | net3=10.0.3.7; net1=10.0.1.13 |
+--------------------------------------+-----------+--------+------------+-------------+-------------------------------+
Create a floating IP for instance1.
$ neutron --os-region-name=CentralRegion floatingip-create ext-net1
+---------------------+--------------------------------------+
| Field | Value |
+---------------------+--------------------------------------+
| created_at | 2017-01-12T07:12:50Z |
| description | |
| fixed_ip_address | |
| floating_ip_address | 163.3.124.6 |
| floating_network_id | 9b3d04be-0c00-40ed-88ff-088da6fcd8bd |
| id | 645f9cd6-d8d4-427a-88fe-770240c96d09 |
| port_id | |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 1 |
| router_id | |
| status | DOWN |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:12:50Z |
+---------------------+--------------------------------------+
List the port in net1 for instance1.
$ neutron --os-region-name=CentralRegion port-list
+------------------------------------+------------------------------------+-------------------+--------------------------------------+
| id | name | mac_address | fixed_ips |
+------------------------------------+------------------------------------+-------------------+--------------------------------------+
| 185b5185-0254-486c-9d8b- | | fa:16:3e:da:ae:99 | {"subnet_id": "2c8f446f- |
| 198af4b4d40e | | | ba02-4140-a793-913033aa3580", |
| | | | "ip_address": "10.0.1.13"} |
| 248f9072-76d6-405a- | | fa:16:3e:dc:2f:b3 | {"subnet_id": "5ab92c3c-b799-451c- |
| 8eb5-f0d3475c542d | | | b5d5-b72274fb0fcc", "ip_address": |
| | | | "10.0.3.7"} |
| d48a8e87-61a0-494b- | | fa:16:3e:c6:8e:c5 | {"subnet_id": "2c8f446f- |
| bc06-54f7a008ea78 | | | ba02-4140-a793-913033aa3580", |
| | | | "ip_address": "10.0.1.1"} |
| ce3a1530-20f4-4760-a451-81e5f939aa | dhcp_port_2c8f446f- | fa:16:3e:e6:32:0f | {"subnet_id": "2c8f446f- |
| fc | ba02-4140-a793-913033aa3580 | | ba02-4140-a793-913033aa3580", |
| | | | "ip_address": "10.0.1.2"} |
| 7925a3cc- | interface_RegionOne_2c8f446f- | fa:16:3e:c5:ad:6f | {"subnet_id": "2c8f446f- |
| 6c36-4bc3-a798-a6145fed442a | ba02-4140-a793-913033aa3580 | | ba02-4140-a793-913033aa3580", |
| | | | "ip_address": "10.0.1.3"} |
| 077c63b6-0184-4bf7-b3aa- | dhcp_port_5ab92c3c-b799-451c- | fa:16:3e:d2:a3:53 | {"subnet_id": "5ab92c3c-b799-451c- |
| b071de6f39be | b5d5-b72274fb0fcc | | b5d5-b72274fb0fcc", "ip_address": |
| | | | "10.0.3.2"} |
| c90be7bc- | interface_RegionOne_5ab92c3c-b799 | fa:16:3e:b6:e4:bc | {"subnet_id": "5ab92c3c-b799-451c- |
| 31ea-4015-a432-2bef62e343d1 | -451c-b5d5-b72274fb0fcc | | b5d5-b72274fb0fcc", "ip_address": |
| | | | "10.0.3.9"} |
| 3053fcb9-b6ad-4a9c-b89e- | bridge_port_532890c765604609a8d2ef | fa:16:3e:fc:d0:fc | {"subnet_id": "53def0ac-59ef- |
| ffe6aff6523b | 6fc8e5f6ef_0c4faa42-5230-4adc- | | 4c7b-b694-3375598954da", |
| | bab5-10ee53ebf888 | | "ip_address": "100.0.0.11"} |
| ce787983-a140-4c53-96d2-71f62e1545 | | fa:16:3e:1a:62:7f | {"subnet_id": "a2eecc16-deb8-42a6 |
| 3a | | | -a41b-5058847ed20a", "ip_address": |
| | | | "163.3.124.5"} |
| 2d9fc640-1858-4c7e-b42c- | | fa:16:3e:00:7c:6e | {"subnet_id": "a2eecc16-deb8-42a6 |
| d3ed3f338b8a | | | -a41b-5058847ed20a", "ip_address": |
| | | | "163.3.124.6"} |
+------------------------------------+------------------------------------+-------------------+--------------------------------------+
Associate the floating IP to instance1’s IP in net1.
$ neutron --os-region-name=CentralRegion floatingip-associate 645f9cd6-d8d4-427a-88fe-770240c96d09 185b5185-0254-486c-9d8b-198af4b4d40e
Associated floating IP 645f9cd6-d8d4-427a-88fe-770240c96d09
Verify the floating IP was associated.
$ neutron --os-region-name=CentralRegion floatingip-list
+--------------------------------------+------------------+---------------------+--------------------------------------+
| id | fixed_ip_address | floating_ip_address | port_id |
+--------------------------------------+------------------+---------------------+--------------------------------------+
| 645f9cd6-d8d4-427a-88fe-770240c96d09 | 10.0.1.13 | 163.3.124.6 | 185b5185-0254-486c-9d8b-198af4b4d40e |
+--------------------------------------+------------------+---------------------+--------------------------------------+
You can also check that in RegionOne.
$ neutron --os-region-name=RegionOne floatingip-list
+--------------------------------------+------------------+---------------------+--------------------------------------+
| id | fixed_ip_address | floating_ip_address | port_id |
+--------------------------------------+------------------+---------------------+--------------------------------------+
| d59362fa-aea0-4e35-917e-8e586212c867 | 10.0.1.13 | 163.3.124.6 | 185b5185-0254-486c-9d8b-198af4b4d40e |
+--------------------------------------+------------------+---------------------+--------------------------------------+
$ neutron --os-region-name=RegionOne router-list
+------------------------------------+------------------------------------+------------------------------------+-------------+-------+
| id | name | external_gateway_info | distributed | ha |
+------------------------------------+------------------------------------+------------------------------------+-------------+-------+
| 0c4faa42-5230-4adc- | 063de74b-d962-4fc2-96d9-87e2cb35c0 | {"network_id": "6932cd71-3cd4-4560 | False | False |
| bab5-10ee53ebf888 | 82 | -88f3-2a112fff0cea", | | |
| | | "enable_snat": false, | | |
| | | "external_fixed_ips": | | |
| | | [{"subnet_id": "53def0ac-59ef- | | |
| | | 4c7b-b694-3375598954da", | | |
| | | "ip_address": "100.0.0.11"}]} | | |
| f99dcc0c-d94a- | ns_router_063de74b-d962-4fc2-96d9- | {"network_id": "9b3d04be-0c00 | False | False |
| 4b41-9236-2c0169f3ab7d | 87e2cb35c082 | -40ed-88ff-088da6fcd8bd", | | |
| | | "enable_snat": true, | | |
| | | "external_fixed_ips": | | |
| | | [{"subnet_id": "a2eecc16-deb8-42a6 | | |
| | | -a41b-5058847ed20a", "ip_address": | | |
| | | "163.3.124.5"}]} | | |
+------------------------------------+------------------------------------+------------------------------------+-------------+-------+
Create network topology in RegionTwo.
Create external network ext-net2, which will be located in RegionTwo.
$ neutron --os-region-name=CentralRegion net-create --provider:network_type vlan --provider:physical_network extern --router:external --availability-zone-hint RegionTwo ext-net2
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | RegionTwo |
| id | ae806ecb-fa3e-4b3c-a582-caef3d8cd9b4 |
| name | ext-net2 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| provider:network_type | vlan |
| provider:physical_network | extern |
| provider:segmentation_id | 183 |
| router:external | True |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
+---------------------------+--------------------------------------+
Now you can also create flat type external network
$ neutron --os-region-name=CentralRegion net-create --provider:network_type flat --provider:physical_network extern --router:external --availability-zone-hint RegionTwo ext-net2
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | RegionTwo |
| id | 0b6d43d1-a837-4f91-930e-dfcc74ef483b |
| name | ext-net2 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| provider:network_type | flat |
| provider:physical_network | extern |
| provider:segmentation_id | |
| router:external | True |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
+---------------------------+--------------------------------------+
Create subnet in ext-net2.
$ neutron --os-region-name=CentralRegion subnet-create --name ext-subnet2 --disable-dhcp ext-net2 163.3.125.0/24
+-------------------+--------------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------------+
| allocation_pools | {"start": "163.3.125.2", "end": "163.3.125.254"} |
| cidr | 163.3.125.0/24 |
| created_at | 2017-01-12T07:43:04Z |
| description | |
| dns_nameservers | |
| enable_dhcp | False |
| gateway_ip | 163.3.125.1 |
| host_routes | |
| id | 9fb32423-95a8-4589-b69c-e2955234ae56 |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | ext-subnet2 |
| network_id | ae806ecb-fa3e-4b3c-a582-caef3d8cd9b4 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 2 |
| subnetpool_id | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:43:04Z |
+-------------------+--------------------------------------------------+
Create router R2 which will work in RegionTwo.
$ neutron --os-region-name=CentralRegion router-create --availability-zone-hint RegionTwo R2
+-------------------------+--------------------------------------+
| Field | Value |
+-------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | RegionTwo |
| availability_zones | |
| created_at | 2017-01-12T07:19:23Z |
| description | |
| external_gateway_info | |
| id | 8a8571db-e3ba-4b78-98ca-13d4dc1a4fb0 |
| name | R2 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 1 |
| status | ACTIVE |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:19:23Z |
+-------------------------+--------------------------------------+
Set the router gateway to ext-net2 for R2.
$ neutron --os-region-name=CentralRegion router-gateway-set R2 ext-net2
Set gateway for router R2
Check router R2.
$ neutron --os-region-name=CentralRegion router-show R2
+-----------------------+------------------------------------------------------------------------------------------------------------+
| Field | Value |
+-----------------------+------------------------------------------------------------------------------------------------------------+
| admin_state_up | True |
| created_at | 2017-01-12T07:19:23Z |
| description | |
| external_gateway_info | {"network_id": "ae806ecb-fa3e-4b3c-a582-caef3d8cd9b4", "external_fixed_ips": [{"subnet_id": |
| | "9fb32423-95a8-4589-b69c-e2955234ae56", "ip_address": "163.3.125.3"}]} |
| id | 8a8571db-e3ba-4b78-98ca-13d4dc1a4fb0 |
| name | R2 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 7 |
| status | ACTIVE |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:44:00Z |
+-----------------------+------------------------------------------------------------------------------------------------------------+
Create net2 in RegionTwo.
$ neutron --os-region-name=CentralRegion net-create --availability-zone-hint RegionTwo net2
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| availability_zone_hints | RegionTwo |
| id | 71b06c5d-2eb8-4ef4-a978-c5c98874811b |
| name | net2 |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| provider:network_type | local |
| provider:physical_network | |
| provider:segmentation_id | |
| router:external | False |
| shared | False |
| status | ACTIVE |
| subnets | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
+---------------------------+--------------------------------------+
Create subnet in net2.
$ neutron --os-region-name=CentralRegion subnet-create net2 10.0.2.0/24
+-------------------+--------------------------------------------+
| Field | Value |
+-------------------+--------------------------------------------+
| allocation_pools | {"start": "10.0.2.2", "end": "10.0.2.254"} |
| cidr | 10.0.2.0/24 |
| created_at | 2017-01-12T07:45:55Z |
| description | |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | 10.0.2.1 |
| host_routes | |
| id | 356947cf-88e2-408b-ab49-7c0e79110a25 |
| ip_version | 4 |
| ipv6_address_mode | |
| ipv6_ra_mode | |
| name | |
| network_id | 71b06c5d-2eb8-4ef4-a978-c5c98874811b |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 2 |
| subnetpool_id | |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-12T07:45:55Z |
+-------------------+--------------------------------------------+
Add router interface for the subnet to R2.
$ neutron --os-region-name=CentralRegion router-interface-add R2 356947cf-88e2-408b-ab49-7c0e79110a25
Added interface 805b16de-fbe9-4b54-b891-b39bc2f73a86 to router R2.
List available images in RegionTwo.
$ glance --os-region-name=RegionTwo image-list
+--------------------------------------+---------------------------------+
| ID | Name |
+--------------------------------------+---------------------------------+
| 6fbad28b-d5f1-4924-a330-f9d5a6cf6c62 | cirros-0.3.4-x86_64-uec |
| cc912d30-5cbe-406d-89f2-8c09a73012c4 | cirros-0.3.4-x86_64-uec-kernel |
| 8660610d-d362-4f20-8f99-4d64c7c21284 | cirros-0.3.4-x86_64-uec-ramdisk |
+--------------------------------------+---------------------------------+
List available flavors in RegionTwo.
$ nova --os-region-name=RegionTwo flavor-list
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
| 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
| 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
| 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
| 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
| c1 | cirros256 | 256 | 0 | 0 | | 1 | 1.0 | True |
| d1 | ds512M | 512 | 5 | 0 | | 1 | 1.0 | True |
| d2 | ds1G | 1024 | 10 | 0 | | 1 | 1.0 | True |
| d3 | ds2G | 2048 | 10 | 0 | | 2 | 1.0 | True |
| d4 | ds4G | 4096 | 20 | 0 | | 4 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
Boot instance2, and connect the instance2 to net2 and net3.
$ nova --os-region-name=RegionTwo boot --flavor 1 --image 6fbad28b-d5f1-4924-a330-f9d5a6cf6c62 --nic net-id=68d04c60-469d-495d-bb23-0d36d56235bd --nic net-id=71b06c5d-2eb8-4ef4-a978-c5c98874811b instance2
+--------------------------------------+----------------------------------------------------------------+
| Property | Value |
+--------------------------------------+----------------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | |
| OS-EXT-SRV-ATTR:host | - |
| OS-EXT-SRV-ATTR:hostname | instance2 |
| OS-EXT-SRV-ATTR:hypervisor_hostname | - |
| OS-EXT-SRV-ATTR:instance_name | |
| OS-EXT-SRV-ATTR:kernel_id | cc912d30-5cbe-406d-89f2-8c09a73012c4 |
| OS-EXT-SRV-ATTR:launch_index | 0 |
| OS-EXT-SRV-ATTR:ramdisk_id | 8660610d-d362-4f20-8f99-4d64c7c21284 |
| OS-EXT-SRV-ATTR:reservation_id | r-xylwc16h |
| OS-EXT-SRV-ATTR:root_device_name | - |
| OS-EXT-SRV-ATTR:user_data | - |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | Lmanqrz9GN77 |
| config_drive | |
| created | 2017-01-13T01:41:19Z |
| description | - |
| flavor | m1.tiny (1) |
| hostId | |
| host_status | |
| id | dbcfef20-0794-4b5e-aa3f-d08dc6086eb6 |
| image | cirros-0.3.4-x86_64-uec (6fbad28b-d5f1-4924-a330-f9d5a6cf6c62) |
| key_name | - |
| locked | False |
| metadata | {} |
| name | instance2 |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tags | [] |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated | 2017-01-13T01:41:19Z |
| user_id | d2521e53aa8c4916b3a8e444f20cf1da |
+--------------------------------------+----------------------------------------------------------------+
Check to see if instance2 is active.
$ nova --os-region-name=RegionTwo list
+--------------------------------------+-----------+--------+------------+-------------+------------------------------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+-----------+--------+------------+-------------+------------------------------+
| dbcfef20-0794-4b5e-aa3f-d08dc6086eb6 | instance2 | ACTIVE | - | Running | net3=10.0.3.4; net2=10.0.2.3 |
+--------------------------------------+-----------+--------+------------+-------------+------------------------------+
Create floating IP for instance2.
$ neutron --os-region-name=CentralRegion floatingip-create ext-net2
+---------------------+--------------------------------------+
| Field | Value |
+---------------------+--------------------------------------+
| created_at | 2017-01-13T01:45:10Z |
| description | |
| fixed_ip_address | |
| floating_ip_address | 163.3.125.4 |
| floating_network_id | ae806ecb-fa3e-4b3c-a582-caef3d8cd9b4 |
| id | e0dcbe62-0023-41a8-a099-a4c4b5285e03 |
| port_id | |
| project_id | 532890c765604609a8d2ef6fc8e5f6ef |
| revision_number | 1 |
| router_id | |
| status | DOWN |
| tenant_id | 532890c765604609a8d2ef6fc8e5f6ef |
| updated_at | 2017-01-13T01:45:10Z |
+---------------------+--------------------------------------+
List port of instance2.
$ neutron --os-region-name=CentralRegion port-list
+------------------------------------+------------------------------------+-------------------+--------------------------------------+
| id | name | mac_address | fixed_ips |
+------------------------------------+------------------------------------+-------------------+--------------------------------------+
| 185b5185-0254-486c-9d8b- | | fa:16:3e:da:ae:99 | {"subnet_id": "2c8f446f- |
| 198af4b4d40e | | | ba02-4140-a793-913033aa3580", |
| | | | "ip_address": "10.0.1.13"} |
| 248f9072-76d6-405a- | | fa:16:3e:dc:2f:b3 | {"subnet_id": "5ab92c3c-b799-451c- |
| 8eb5-f0d3475c542d | | | b5d5-b72274fb0fcc", "ip_address": |
| | | | "10.0.3.7"} |
| 6b0fe2e0-a236-40db-bcbf- | | fa:16:3e:73:21:6c | {"subnet_id": "356947cf-88e2-408b- |
| 2f31f7124d83 | | | ab49-7c0e79110a25", "ip_address": |
| | | | "10.0.2.3"} |
| ab6dd6f4-b48a-4a3e- | | fa:16:3e:67:03:73 | {"subnet_id": "5ab92c3c-b799-451c- |
| 9f43-90d0fccc181a | | | b5d5-b72274fb0fcc", "ip_address": |
| | | | "10.0.3.4"} |
| 5c0e0e7a-0faf- | | fa:16:3e:7b:11:c6 | |
| 44c4-a735-c8745faa9920 | | | |
| d48a8e87-61a0-494b- | | fa:16:3e:c6:8e:c5 | {"subnet_id": "2c8f446f- |
| bc06-54f7a008ea78 | | | ba02-4140-a793-913033aa3580", |
| | | | "ip_address": "10.0.1.1"} |
| ce3a1530-20f4-4760-a451-81e5f939aa | dhcp_port_2c8f446f- | fa:16:3e:e6:32:0f | {"subnet_id": "2c8f446f- |
| fc | ba02-4140-a793-913033aa3580 | | ba02-4140-a793-913033aa3580", |
| | | | "ip_address": "10.0.1.2"} |
| 7925a3cc- | interface_RegionOne_2c8f446f- | fa:16:3e:c5:ad:6f | {"subnet_id": "2c8f446f- |
| 6c36-4bc3-a798-a6145fed442a | ba02-4140-a793-913033aa3580 | | ba02-4140-a793-913033aa3580", |
| | | | "ip_address": "10.0.1.3"} |
| 805b16de- | | fa:16:3e:94:cd:82 | {"subnet_id": "356947cf-88e2-408b- |
| fbe9-4b54-b891-b39bc2f73a86 | | | ab49-7c0e79110a25", "ip_address": |
| | | | "10.0.2.1"} |
| 30243711-d113-42b7-b712-81ca0d7454 | dhcp_port_356947cf-88e2-408b- | fa:16:3e:83:3d:c8 | {"subnet_id": "356947cf-88e2-408b- |
| 6d | ab49-7c0e79110a25 | | ab49-7c0e79110a25", "ip_address": |
| | | | "10.0.2.2"} |
| 27fab5a2-0710-4742-a731-331f6c2150 | interface_RegionTwo_356947cf-88e2 | fa:16:3e:39:0a:f5 | {"subnet_id": "356947cf-88e2-408b- |
| fa | -408b-ab49-7c0e79110a25 | | ab49-7c0e79110a25", "ip_address": |
| | | | "10.0.2.6"} |
| a7d0bae1-51de- | interface_RegionTwo_5ab92c3c-b799 | fa:16:3e:d6:3f:ca | {"subnet_id": "5ab92c3c-b799-451c- |
| 4b47-9f81-b012e511e4a7 | -451c-b5d5-b72274fb0fcc | | b5d5-b72274fb0fcc", "ip_address": |
| | | | "10.0.3.11"} |
| 077c63b6-0184-4bf7-b3aa- | dhcp_port_5ab92c3c-b799-451c- | fa:16:3e:d2:a3:53 | {"subnet_id": "5ab92c3c-b799-451c- |
| b071de6f39be | b5d5-b72274fb0fcc | | b5d5-b72274fb0fcc", "ip_address": |
| | | | "10.0.3.2"} |
| c90be7bc- | interface_RegionOne_5ab92c3c-b799 | fa:16:3e:b6:e4:bc | {"subnet_id": "5ab92c3c-b799-451c- |
| 31ea-4015-a432-2bef62e343d1 | -451c-b5d5-b72274fb0fcc | | b5d5-b72274fb0fcc", "ip_address": |
| | | | "10.0.3.9"} |
| 3053fcb9-b6ad-4a9c-b89e- | bridge_port_532890c765604609a8d2ef | fa:16:3e:fc:d0:fc | {"subnet_id": "53def0ac-59ef- |
| ffe6aff6523b | 6fc8e5f6ef_0c4faa42-5230-4adc- | | 4c7b-b694-3375598954da", |
| | bab5-10ee53ebf888 | | "ip_address": "100.0.0.11"} |
| 5a10c53f-1f8f-43c1-a61c- | bridge_port_532890c765604609a8d2ef | fa:16:3e:dc:f7:4a | {"subnet_id": "53def0ac-59ef- |
| 6cdbd052985e | 6fc8e5f6ef_cf71a43d-6df1-491d- | | 4c7b-b694-3375598954da", |
| | 894d-bd2e6620acfc | | "ip_address": "100.0.0.8"} |
| ce787983-a140-4c53-96d2-71f62e1545 | | fa:16:3e:1a:62:7f | {"subnet_id": "a2eecc16-deb8-42a6 |
| 3a | | | -a41b-5058847ed20a", "ip_address": |
| | | | "163.3.124.5"} |
| 2d9fc640-1858-4c7e-b42c- | | fa:16:3e:00:7c:6e | {"subnet_id": "a2eecc16-deb8-42a6 |
| d3ed3f338b8a | | | -a41b-5058847ed20a", "ip_address": |
| | | | "163.3.124.6"} |
| bfd53cea-6135-4515-ae63-f346125335 | | fa:16:3e:ae:81:6f | {"subnet_id": "9fb32423-95a8-4589 |
| 27 | | | -b69c-e2955234ae56", "ip_address": |
| | | | "163.3.125.3"} |
| 12495d5b-5346-48d0-8ed2-daea6ad42a | | fa:16:3e:d4:83:cc | {"subnet_id": "9fb32423-95a8-4589 |
| 3a | | | -b69c-e2955234ae56", "ip_address": |
| | | | "163.3.125.4"} |
+------------------------------------+------------------------------------+-------------------+--------------------------------------+
Associate the floating IP to the instance2’s IP address in net2.
$ neutron --os-region-name=CentralRegion floatingip-associate e0dcbe62-0023-41a8-a099-a4c4b5285e03 6b0fe2e0-a236-40db-bcbf-2f31f7124d83
Associated floating IP e0dcbe62-0023-41a8-a099-a4c4b5285e03
Make sure the floating IP association works.
$ neutron --os-region-name=CentralRegion floatingip-list
+--------------------------------------+------------------+---------------------+--------------------------------------+
| id | fixed_ip_address | floating_ip_address | port_id |
+--------------------------------------+------------------+---------------------+--------------------------------------+
| 645f9cd6-d8d4-427a-88fe-770240c96d09 | 10.0.1.13 | 163.3.124.6 | 185b5185-0254-486c-9d8b-198af4b4d40e |
| e0dcbe62-0023-41a8-a099-a4c4b5285e03 | 10.0.2.3 | 163.3.125.4 | 6b0fe2e0-a236-40db-bcbf-2f31f7124d83 |
+--------------------------------------+------------------+---------------------+--------------------------------------+
You can verify that in RegionTwo.
$ neutron --os-region-name=RegionTwo floatingip-list
+--------------------------------------+------------------+---------------------+--------------------------------------+
| id | fixed_ip_address | floating_ip_address | port_id |
+--------------------------------------+------------------+---------------------+--------------------------------------+
| b8a6b83a-cc8f-4335-894c-ef71e7504ee1 | 10.0.2.3 | 163.3.125.4 | 6b0fe2e0-a236-40db-bcbf-2f31f7124d83 |
+--------------------------------------+------------------+---------------------+--------------------------------------+
Instance1 can ping instance2 through the IP address in the net3, and vice versa.
Note: Not all images will bring up the second nic, so you can ssh into instance1 or instance2, use ifconfig -a to check whether all NICs are created, and bring up all NICs if necessary.
Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.