network¶

A network is an isolated Layer 2 networking segment. There are two types of networks, project and provider networks. Project networks are fully isolated and are not shared with other projects. Provider networks map to existing physical networks in the data center and provide external network access for servers and other resources. Only an OpenStack administrator can create provider networks. Networks can be connected via routers.

Compute v2, Network v2

network create¶

Create new network

openstack network create
    [--share | --no-share]
    [--enable | --disable]
    [--project <project>]
    [--description <description>]
    [--mtu <mtu>]
    [--project-domain <project-domain>]
    [--availability-zone-hint <availability-zone>]
    [--enable-port-security | --disable-port-security]
    [--external | --internal]
    [--default | --no-default]
    [--qos-policy <qos-policy>]
    [--transparent-vlan | --no-transparent-vlan]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--dns-domain <dns-domain>]
    [--tag <tag> | --no-tag]
    --subnet <subnet>
    <name>

--share¶: Share the network between projects

--no-share¶: Do not share the network between projects

--enable¶

Enable network (default)

Network version 2 only

--disable¶

Disable network

Network version 2 only

--project <project>¶

Owner’s project (name or ID)

Network version 2 only

--description <description>¶

Set network description

Network version 2 only

--mtu <mtu>¶

Set network mtu

Network version 2 only

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--availability-zone-hint <availability-zone>¶

Availability Zone in which to create this network (Network Availability Zone extension required, repeat option to set multiple availability zones)

Network version 2 only

--enable-port-security¶

Enable port security by default for ports created on this network (default)

Network version 2 only

--disable-port-security¶

Disable port security by default for ports created on this network

Network version 2 only

--external¶

Set this network as an external network (external-net extension required)

Network version 2 only

--internal¶

Set this network as an internal network (default)

Network version 2 only

--default¶

Specify if this network should be used as the default external network

Network version 2 only

--no-default¶

Do not use the network as the default external network (default)

Network version 2 only

--qos-policy <qos-policy>¶

QoS policy to attach to this network (name or ID)

Network version 2 only

--transparent-vlan¶

Make the network VLAN transparent

Network version 2 only

--no-transparent-vlan¶

Do not make the network VLAN transparent

Network version 2 only

--provider-network-type <provider-network-type>¶: The physical mechanism by which the virtual network is implemented. For example: flat, geneve, gre, local, vlan, vxlan.

--provider-physical-network <provider-physical-network>¶: Name of the physical network over which the virtual network is implemented

--provider-segment <provider-segment>¶: VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

--dns-domain <dns-domain>¶: Set DNS domain for this network (requires DNS integration extension)

--tag <tag>¶

Tag to be added to the network (repeat option to set multiple tags)

Network version 2 only

--no-tag¶

No tags associated with the network

Network version 2 only

--subnet <subnet>¶

IPv4 subnet for fixed IPs (in CIDR notation)

Compute version 2 only

name¶: New network name

network delete¶

Delete network(s)

openstack network delete <network> [<network> ...]

network¶: Network(s) to delete (name or ID)

network list¶

List networks

openstack network list
    [--sort-column SORT_COLUMN]
    [--sort-ascending | --sort-descending]
    [--external | --internal]
    [--long]
    [--name <name>]
    [--enable | --disable]
    [--project <project>]
    [--project-domain <project-domain>]
    [--share | --no-share]
    [--status <status>]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--agent <agent-id>]
    [--tags <tag>[,<tag>,...]]
    [--any-tags <tag>[,<tag>,...]]
    [--not-tags <tag>[,<tag>,...]]
    [--not-any-tags <tag>[,<tag>,...]]

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending¶: sort the column(s) in ascending order

--sort-descending¶: sort the column(s) in descending order

--external¶

List external networks

Network version 2 only

--internal¶

List internal networks

Network version 2 only

--long¶

List additional fields in output

Network version 2 only

--name <name>¶

List networks according to their name

Network version 2 only

--enable¶

List enabled networks

Network version 2 only

--disable¶

List disabled networks

Network version 2 only

--project <project>¶: List networks according to their project (name or ID)

--project-domain <project-domain>¶

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

Network version 2 only

--share¶

List networks shared between projects

Network version 2 only

--no-share¶

List networks not shared between projects

Network version 2 only

--status <status>¶

List networks according to their status (‘ACTIVE’, ‘BUILD’, ‘DOWN’, ‘ERROR’)

Network version 2 only

--provider-network-type <provider-network-type>¶

List networks according to their physical mechanisms. The supported options are: flat, geneve, gre, local, vlan, vxlan.

Network version 2 only

--provider-physical-network <provider-physical-network>¶

List networks according to name of the physical network

Network version 2 only

--provider-segment <provider-segment>¶

List networks according to VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

Network version 2 only

--agent <agent-id>¶

List networks hosted by agent (ID only)

Network version 2 only

--tags <tag>[,<tag>,...]¶

List networks which have all given tag(s) (Comma-separated list of tags)

Network version 2 only

--any-tags <tag>[,<tag>,...]¶

List networks which have any given tag(s) (Comma-separated list of tags)

Network version 2 only

--not-tags <tag>[,<tag>,...]¶

Exclude networks which have all given tag(s) (Comma-separated list of tags)

Network version 2 only

--not-any-tags <tag>[,<tag>,...]¶

Exclude networks which have any given tag(s) (Comma-separated list of tags)

Network version 2 only

network set¶

Set network properties

openstack network set
    [--name <name>]
    [--enable | --disable]
    [--share | --no-share]
    [--description <description]
    [--mtu <mtu]
    [--enable-port-security | --disable-port-security]
    [--external | --internal]
    [--default | --no-default]
    [--qos-policy <qos-policy> | --no-qos-policy]
    [--tag <tag>]
    [--no-tag]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--dns-domain <dns-domain>]
    <network>

--name <name>¶: Set network name

--enable¶: Enable network

--disable¶: Disable network

--share¶: Share the network between projects

--no-share¶: Do not share the network between projects

--description <description¶: Set network description

--mtu <mtu¶: Set network mtu

--enable-port-security¶: Enable port security by default for ports created on this network

--disable-port-security¶: Disable port security by default for ports created on this network

--external¶: Set this network as an external network (external-net extension required)

--internal¶: Set this network as an internal network

--default¶: Set the network as the default external network

--no-default¶: Do not use the network as the default external network

--qos-policy <qos-policy>¶: QoS policy to attach to this network (name or ID)

--no-qos-policy¶: Remove the QoS policy attached to this network

--tag <tag>¶: Tag to be added to the network (repeat option to set multiple tags)

--no-tag¶: Clear tags associated with the network. Specify both –tag and –no-tag to overwrite current tags

--provider-network-type <provider-network-type>¶: The physical mechanism by which the virtual network is implemented. For example: flat, geneve, gre, local, vlan, vxlan.

--provider-physical-network <provider-physical-network>¶: Name of the physical network over which the virtual network is implemented

--provider-segment <provider-segment>¶: VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

--dns-domain <dns-domain>¶: Set DNS domain for this network (requires DNS integration extension)

network¶: Network to modify (name or ID)

network show¶

Show network details

openstack network show <network>

network¶: Network to display (name or ID)

network unset¶

Unset network properties

openstack network unset [--tag <tag> | --all-tag] <network>

--tag <tag>¶: Tag to be removed from the network (repeat option to remove multiple tags)

--all-tag¶: Clear all tags associated with the network

network¶: Network to modify (name or ID)

network

network¶

network create¶

network delete¶

network list¶

network set¶

network show¶

network unset¶

OpenStack Command Line Client 5.5.2.dev22

Page Contents