5.30.2. OpenStack reliability testing. Version 2.0

status

draft

version

2.0

Abstract

This test plan describes methodology for reliability testing of OpenStack.

Conventions

  • Recovery period - the period of time after the fault when service performance degrades

  • MTTR - mean time to recover service performance after the fault.

  • Service Downtime - the time when service was not available.

  • Absolute performance degradation - is an absolute difference between the mean of operation duration during recovery period and the baseline’s.

  • Relative performance degradation - is the ratio between the mean of operation duration during recovery period and the baseline’s.

  • Fault injection - the function that emulates failure in software or hardware.

  • Service hang - fault that emulates hanging service by sending SIGSTOP and SIGCONT POSIX signals to service process(es).

  • Service crash - fault that emulates abnormal program termination by sending SIGKILL signal to service process(es).

  • Node crash - fault that emulates unexpected power outage of hardware.

  • Network partition - fault that result in connectivity loss between service components running on different hardware nodes; used to toggle split-brain conditions in HA service.

  • Network flapping - fault that emulates disconnection of network interface on hardware node or switch.

5.30.2.1. Test Plan

5.30.2.1.1. Test Environment

5.30.2.1.1.1. Preparation

This test plan is executed against existing OpenStack cloud.

Measurements can be done with the tool that:

  • is able to inject faults into existing OpenStack cloud at specified moment of execution;

  • collects duration of single operations and errors;

  • calculates metrics specified in the test plan (e.g. MTTR, Service Downtime).

5.30.2.1.1.2. Environment description

The environment description includes hardware specification of servers, network parameters, operation system and OpenStack deployment characteristics.

5.30.2.1.1.2.1. Hardware

This section contains list of all types of hardware nodes.

Parameter

Value

Comments

model

e.g. Supermicro X9SRD-F

CPU

e.g. 6 x Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz

role

e.g. compute or network
5.30.2.1.1.2.2. Network

This section contains list of interfaces and network parameters. For complicated cases this section may include topology diagram and switch parameters.

Parameter

Value

Comments

network role

e.g. provider or public

card model

e.g. Intel

driver

e.g. ixgbe

speed

e.g. 10G or 1G

MTU

e.g. 9000

offloading modes

e.g. default
5.30.2.1.1.2.3. Software

This section describes installed software.

Parameter

Value

Comments

OS

e.g. Ubuntu 14.04.3

OpenStack

e.g. Liberty

Hypervisor

e.g. KVM

Neutron plugin

e.g. ML2 + OVS

L2 segmentation

e.g. VLAN or VxLAN or GRE

virtual routers

e.g. legacy or HA or DVR

5.30.2.1.2. Test Case: Reliability Metrics Calculation

5.30.2.1.2.1. Description

The test case is performed by running a specific OpenStack operation with injected fault. Every test is executed several times to collect more reliable statistical data.

5.30.2.1.2.2. Parameters

The test case is configured with:

  • OpenStack operation that is tested (e.g. network creation);

  • fault that is injected into execution pipeline (e.g. service restart);

Types of faults:

  • Service-related:

    • restart - service is stopped gracefully and then started;

    • kill - service is terminated abruptly by OS;

    • unplug/plug - service network partitioning.

  • Node-related:

    • reboot - node is rebooted gracefully;

    • reset - cold restart of the node with potential data loss;

    • poweroff/poweron - node is switched off and on;

    • connect/disconnect - node’s network interface is flapped.

5.30.2.1.2.3. List of performance metrics

A particular fault may affect operations in different ways. Operations may fail with error and we can count such errors and estimate how long the downtime was. Operations may degrade in performance and we can compare performance with base numbers. Also we can estimate time while the performance was degraded.

If both errors and performance degradation are observed the image could look like the following:

../../../_images/hypothesis.png

Here the light blue line shows the mean operation duration, orange area is where errors are observed and yellow where the performance is low.

Overall the following metrics need to be collected:

Priority

Value

Measurement Unit

Description

1

Service downtime

sec

How long the service was not available and operations were in error state.

1

MTTR

sec

How long does it takes to recover service performance after the failure.

1

Absolute performance degradation

sec

the mean of difference in operation performance during recovery period and operation performance when service operates normally.

1

Relative performance degradation

ratio

the ratio between operation performance during recovery period and operation performance when service operates normally.

The final report may also contain one or more charts that show operation behavior during the test.

5.30.2.2. Tools

5.30.2.2.1. Rally + os-faults

This test plan can be executed with Rally tool. Rally can report duration of individual operations and report errors. Rally Hooks features allows to call external code at specified moments of scenario execution.

os-faults library provides a generic way to inject faults into OpenStack cloud. It supports both service and node based operations.

The integration between Rally and os-faults is implemented as Rally hooks plugin: fault_injection.py

5.30.2.2.1.1. Calculations

Metrics calculations are based on raw data collected from Rally (Rally json output). The raw data contains list of iterations with duration of each iteration. If some operation failed the iteration contains error field. Also raw data contains hook information, when it was started and its execution status.

The period of scenario execution before the hook is interpreted as the baseline. It is used to measure operation’s baseline mean and deviation.

Service downtime is calculated as time interval between the first and the last errors. The precision of calculation is average distance between the last succeed operation and the first error, and the last error and the next succeed operation.

To find the recovery period we first calculate the mean duration of consequent operations with sliding window. The period is treated as Recovery period when mean operation duration is significantly more than the mean operation duration in the baseline. The average duration of Recovery period is MTTR value. Absolute performance degradatio is calculated as difference between mean of operation duration during Recovery period and the baseline’s. Relative performance degradation is the ratio between mean of operation duration during Recovery period and the baseline’s.

5.30.2.2.1.2. How to run

Prerequisites:

  • Install Rally tool and configure deployment parameters

    • Verify that Rally is properly installed by running rally show flavors

  • Install os-faults library: pip install os-faults

    • Configure cloud and power management parameters, refer to os-faults-cfg

    • Verify parameters by running os-inject-fault -v

  • Install RallyRunners tool: pip install rally-runners

Run scenarios:

rally-reliability -s SCENARIO -o OUTPUT -b BOOK

To show full list of scenarios:

rally-reliability -h

5.30.2.3. Reports

Test plan execution reports: