ARP

class os_ken.lib.packet.arp.arp(hwtype=1, proto=2048, hlen=6, plen=4, opcode=1, src_mac='ff:ff:ff:ff:ff:ff', src_ip='0.0.0.0', dst_mac='ff:ff:ff:ff:ff:ff', dst_ip='0.0.0.0')

ARP (RFC 826) header encoder/decoder class.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. IPv4 addresses are represented as a string like '192.0.2.1'. MAC addresses are represented as a string like '08:60:6e:7f:74:e7'. __init__ takes the corresponding args in this order.

Attribute	Description	Example
hwtype	Hardware address.
proto	Protocol address.
hlen	byte length of each hardware address.
plen	byte length of each protocol address.
opcode	operation codes.
src_mac	Hardware address of sender.	'08:60:6e:7f:74:e7'
src_ip	Protocol address of sender.	'192.0.2.1'
dst_mac	Hardware address of target.	'00:00:00:00:00:00'
dst_ip	Protocol address of target.	'192.0.2.2'

classmethod parser(buf)

Decode a protocol header.

This method is used only when decoding a packet.

Decode a protocol header at offset 0 in bytearray buf. Returns the following three objects.

• An object to describe the decoded header.

• A packet_base.PacketBase subclass appropriate for the rest of the packet. None when the rest of the packet should be considered as raw payload.

• The rest of packet.

serialize(payload, prev)

Encode a protocol header.

This method is used only when encoding a packet.

Encode a protocol header. Returns a bytearray which contains the header.

payload is the rest of the packet which will immediately follow this header.

prev is a packet_base.PacketBase subclass for the outer protocol header. prev is None if the current header is the outer-most. For example, prev is ipv4 or ipv6 for tcp.serialize.

os_ken.lib.packet.arp.arp_ip(opcode, src_mac, src_ip, dst_mac, dst_ip)

A convenient wrapper for IPv4 ARP for Ethernet.

This is an equivalent of the following code.

arp(ARP_HW_TYPE_ETHERNET, ether.ETH_TYPE_IP, 6, 4, opcode, src_mac, src_ip, dst_mac, dst_ip)