Zadara Storage VPSA volume driver¶

System requirements¶

To use Zadara Storage VPSA Volume Driver you will require:

• Zadara Storage VPSA version 15.07 and above
• iSCSI or iSER host interfaces

Supported operations¶

• Create, delete, attach, and detach volumes
• Create, list, and delete volume snapshots
• Create a volume from a snapshot
• Copy an image to a volume
• Copy a volume to an image
• Clone a volume
• Extend a volume
• Migrate a volume with back end assistance

Configuration¶

1. Create a VPSA pool(s) or make sure you have an existing pool(s) that will be used for volume services. The VPSA pool(s) will be identified by its ID (pool-xxxxxxxx). For further details, see the VPSA’s user guide.
2. Adjust the cinder.conf configuration file to define the volume driver name along with a storage back end entry for each VPSA pool that will be managed by the block storage service. Each back end entry requires a unique section name, surrounded by square brackets (or parentheses), followed by options in key=value format.

Sample minimum back end configuration

[DEFAULT]
enabled_backends = vpsa

[vpsa]
zadara_vpsa_host = 172.31.250.10
zadara_vpsa_port = 80
zadara_user = vpsauser
zadara_password = mysecretpassword
zadara_use_iser = false
zadara_vpsa_poolname = pool-00000001
volume_driver = cinder.volume.drivers.zadara.ZadaraVPSAISCSIDriver
volume_backend_name = vpsa

Driver-specific options¶

This section contains the configuration options that are specific to the Zadara Storage VPSA driver.