Enabling Provider Networks

Provider networks allow to connect compute instances directly to physical networks avoiding tunnels. This is necessary for example for some performance critical applications. Only administrators of OpenStack can create such networks. For provider networks compute hosts must have external bridge created and configured by Ansible tasks like it is already done for tenant DVR mode networking. Normal tenant non-DVR networking does not need external bridge on compute hosts and therefore operators don’t need additional dedicated network interface.

To enable provider networks modify the configuration file /etc/kolla/globals.yml:

enable_neutron_provider_networks: "yes"

Enabling Neutron Extensions

Overview

Kolla deploys Neutron by default as OpenStack networking component. This guide describes configuring and running Neutron extensions like LBaaS, Networking-SFC, QoS, etc.

Networking-SFC

Preparation and deployment

Modify the configuration file /etc/kolla/globals.yml and change the following:

neutron_plugin_agent: "sfc"

Networking-SFC is an additional Neutron plugin. For SFC to work, this plugin has to be installed in neutron-server container as well. Modify the configuration file /etc/kolla/kolla-build.conf and add the following contents:

[neutron-server-plugin-networking-sfc]
type = git
location = https://github.com/openstack/networking-sfc.git
reference = mitaka

Verification

Verify the build and deploy operation of Networking-SFC container. Successful deployment will bring up an SFC container in the list of running containers. Run the following command to login into the neutron-server container:

docker exec -it neutron_server bash

Neutron should provide the following CLI extensions.

#neutron help|grep port

port-chain-create                 [port_chain] Create a Port Chain.
port-chain-delete                 [port_chain] Delete a given Port Chain.
port-chain-list                   [port_chain] List Port Chains that belong
                                  to a given tenant.
port-chain-show                   [port_chain] Show information of a
                                  given Port Chain.
port-chain-update                 [port_chain] Update Port Chain's
                                  information.
port-pair-create                  [port_pair] Create a Port Pair.
port-pair-delete                  [port_pair] Delete a given Port Pair.
port-pair-group-create            [port_pair_group] Create a Port Pair
                                  Group.
port-pair-group-delete            [port_pair_group] Delete a given
                                  Port Pair Group.
port-pair-group-list              [port_pair_group] List Port Pair Groups
                                  that belongs to a given tenant.
port-pair-group-show              [port_pair_group] Show information of a
                                  given Port Pair Group.
port-pair-group-update            [port_pair_group] Update Port Pair
                                  Group's information.
port-pair-list                    [port_pair] List Port Pairs that belongs
                                  to a given tenant.
port-pair-show                    [port_pair] Show information of a given
                                  Port Pair.
port-pair-update                  [port_pair] Update Port Pair's
                                  information.

For setting up a testbed environment and creating a port chain, please refer to the following link:

For the source code, please refer to the following link:

Neutron VPNaaS (VPN-as-a-Service)

Preparation and deployment

Modify the configuration file /etc/kolla/globals.yml and change the following:

enable_neutron_vpnaas: "yes"

Verification

VPNaaS is a complex subject, hence this document provides directions for a simple smoke test to verify the service is up and running.

On the network node(s), the neutron_vpnaas_agent should be up (image naming and versioning may differ depending on deploy configuration):

docker ps --filter name=neutron_vpnaas_agent
CONTAINER ID        IMAGE
COMMAND             CREATED             STATUS              PORTS
NAMES
97d25657d55e
operator:5000/kolla/oraclelinux-source-neutron-vpnaas-agent:4.0.0
"kolla_start"       44 minutes ago      Up 44 minutes
neutron_vpnaas_agent

Kolla-Ansible includes a small script that can be used in tandem with tools/init-runonce to verify the VPN using two routers and two Nova VMs:

tools/init-runonce
tools/init-vpn

Verify both VPN services are active:

neutron vpn-service-list
+--------------------------------------+----------+--------------------------------------+--------+
| id                                   | name     | router_id                            | status |
+--------------------------------------+----------+--------------------------------------+--------+
| ad941ec4-5f3d-4a30-aae2-1ab3f4347eb1 | vpn_west | 051f7ce3-4301-43cc-bfbd-7ffd59af539e | ACTIVE |
| edce15db-696f-46d8-9bad-03d087f1f682 | vpn_east | 058842e0-1d01-4230-af8d-0ba6d0da8b1f | ACTIVE |
+--------------------------------------+----------+--------------------------------------+--------+

Two VMs can now be booted, one on vpn_east, the other on vpn_west, and encrypted ping packets observed being sent from one to the other.

For more information on this and VPNaaS in Neutron refer to the VPNaaS area on the OpenStack wiki: